Related Material — 56% match
based on chemical composition and mechanical property overlap.
UNS C11000 and UNS C10100 are both copper grades.
Both fall under the Copper Alloys category.
UNS C11000 is defined under Unified Numbering System (UNS), originating from United States, while UNS C10100 is defined under Unified Numbering System (UNS), originating from United States.
As per chemical composition, UNS C11000 vs UNS C10100 is a 34% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a related material overall at 56%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
UNS C11000
UNS C10100
Yield Strength
~69 MPa (annealed O60)
~69 MPa (annealed O60)
Tensile Strength
~220 MPa (annealed O60)
~220 MPa (annealed O60)
Elongation
~45% (annealed O60)
~45% (annealed O60)
Note
ETP copper, values for soft annealed condition
Oxygen-free electronic copper, values for soft annealed condition
Key Differences
UNS C10100 specifies Pb, Zn, Fe, P which are not specified for UNS C11000.
Can UNS C11000 Be Substituted With UNS C10100?
UNS C11000 and UNS C10100 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between UNS C11000 and UNS C10100?
UNS C10100 specifies Pb, Zn, Fe, P which are not specified for UNS C11000.
Can UNS C11000 be substituted with UNS C10100?
UNS C11000 and UNS C10100 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.