Post Stock Login Register

AISI 1213 vs IS 1570 (Part 3) 10C8S10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

AISI 1213 and IS 1570 (Part 3) 10C8S10 (IS 1570 (Part 3):1979) are both steel grades. Both fall under the Free Machining Steel category. AISI 1213 is defined under AISI, originating from United States, while IS 1570 (Part 3) 10C8S10 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, AISI 1213 vs IS 1570 (Part 3) 10C8S10 is a 75.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With AISI 1213:
SAE J403 1132 SAE J403 1117 SAE J403 1126 SAE J403 1132 IS 4432 10C8S10 SAE J403 1117 SAE J403 1117 SAE J403 1118 SAE J403 1118 SAE J403 1118 SAE J403 1126 SAE J403 1126
Match Breakdown
CHEMISTRY MATCH
75.6%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property AISI 1213 IS 1570 (Part 3) 10C8S10
Standard AISI IS 1570 (Part 3):1979
Category Free Machining Steel Free Machining Steel
C (%) ≤0.13 <=0.15
Mn (%) 0.70–1.00 0.60-0.90
S (%) 0.24–0.33 0.08-0.13
P (%) 0.07–0.12 <=0.060
Si (%) Not specified 0.05-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AISI 1213 IS 1570 (Part 3) 10C8S10
Tensile Strength 380–490 MPa 370-490 MPa
Elongation ≥10% >=24%
Hardness ≤149 HB Not specified
Condition Not specified Hot rolled or normalized bars, billets and forgings (Table 2), ruling sections up to 150 mm
Typical Applications
AISI 1213
Screw machine products, bolts, studs
IS 1570 (Part 3) 10C8S10
Not documented
Key Differences
Can AISI 1213 Be Substituted With IS 1570 (Part 3) 10C8S10?
AISI 1213 and IS 1570 (Part 3) 10C8S10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AISI 1213
Hex Bar → (3 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 3300–4600 mm (129.92–181.1 in)
IS 1570 (Part 3) 10C8S10
No active listings currently.
On M-EX Right Now
AISI 1213
3 active listings and RFQs →
IS 1570 (Part 3) 10C8S10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between AISI 1213 and IS 1570 (Part 3) 10C8S10?
IS 1570 (Part 3) 10C8S10 specifies Si which is not specified for AISI 1213.
Can AISI 1213 be substituted with IS 1570 (Part 3) 10C8S10?
AISI 1213 and IS 1570 (Part 3) 10C8S10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.