Post Stock Login Register

ASTM A959 SS304 vs EN 10088-1 1.4301

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

ASTM A959 SS304 (ASTM A959:2011) and EN 10088-1 1.4301 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 SS304 is typically used for food processing, chemical equipment, kitchen equipment, while EN 10088-1 1.4301 is commonly used for food equipment, chemical vessels, architectural, kitchenware. ASTM A959 SS304 is defined under ASTM International, originating from United States, while EN 10088-1 1.4301 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 SS304 vs EN 10088-1 1.4301 is a 84.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With ASTM A959 SS304:
EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 GOST 5632 12Kh13 ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
84.1%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property ASTM A959 SS304 EN 10088-1 1.4301
Standard ASTM A959:2011 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.07 ≤0.07
Cr (%) 17.5-19.5 17.5–19.5
Mn (%) <=2.00 ≤2.00
Ni (%) 8.0-11.0 8.0–10.5
P (%) <=0.045 ≤0.045
S (%) <=0.030 ≤0.030
Si (%) <=1.00 ≤1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 SS304 EN 10088-1 1.4301
Tensile Strength Not specified ≥520 MPa
Yield Strength Not specified ≥210 MPa
Elongation Not specified ≥45%
Hardness Not specified ≤215 HB
Typical Applications
ASTM A959 SS304
Food processing, chemical equipment, kitchen equipment
EN 10088-1 1.4301
Food equipment, chemical vessels, architectural, kitchenware
Can ASTM A959 SS304 Be Substituted With EN 10088-1 1.4301?
ASTM A959 SS304 and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A959 SS304
Sheet → (22 listings)
Thickness: 2–6 mm (0.08–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–4100 mm (98.43–161.42 in)
Round Bar → (6 listings)
Diameter: 50–65 mm (1.97–2.56 in)
Length: 2500–6900 mm (98.43–271.65 in)
Plate → (6 listings)
Thickness: 8–12 mm (0.31–0.47 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3800 mm (98.43–149.61 in)
EN 10088-1 1.4301
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3300 mm (98.43–129.92 in)
On M-EX Right Now
ASTM A959 SS304
34 active listings and RFQs →
EN 10088-1 1.4301
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 SS304 and EN 10088-1 1.4301?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 SS304 be substituted with EN 10088-1 1.4301?
ASTM A959 SS304 and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.