Post Stock Login Register

AS/NZS 1594 HA250 vs EN 10025-2 S250

Strong Match — 96.7% match based on chemical composition and mechanical property overlap.

AS/NZS 1594 HA250 (AS/NZS 1594:2025) and EN 10025-2 S250 (EN 10025-2:2019) are both steel grades. Both fall under the Structural Steel category. AS/NZS 1594 HA250 is typically used for light structural sections, domestic appliances, agricultural equipment, general sheet metal fabrication, ducting., while EN 10025-2 S250 is commonly used for used for fabricated structures, beams, support frames, machinery bases, towers, and construction components.. AS/NZS 1594 HA250 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while EN 10025-2 S250 is defined under European Standard (EN), originating from Europe.

As per chemical composition, AS/NZS 1594 HA250 vs EN 10025-2 S250 is a 95% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 96.7%.

Frequently Compared With AS/NZS 1594 HA250:
ASTM A283C CSA G40.21 260W ASTM A1008 SS Grade 50 AS/NZS 1595 C450 AS/NZS 1595 C350 CSA G40.21 400W AS/NZS 3679.1 300 CSA G40.21 300W CSA G40.21 480W ASTM A1008 SS Grade 80 GOST 19281 09G2S CSA G40.21 350W
Match Breakdown
CHEMISTRY MATCH
95%
MECHANICAL MATCH
100%
OVERALL
96.7%
Specifications
Property AS/NZS 1594 HA250 EN 10025-2 S250
Standard AS/NZS 1594:2025 EN 10025-2:2019
Category Structural Steel Structural Steel
C (%) max 0.17 0.20 max
Mn (%) max 1.2 1.50 max
Si (%) max 0.5 0.40 max
P (%) max 0.03 0.040 max
S (%) max 0.03 0.040 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS 1594 HA250 EN 10025-2 S250
Yield Strength 250 MPa min (AS/NZS 1594) 250 MPa min
Tensile Strength Not specified 410-560 MPa
Elongation Not specified 22-25%
Hardness Not specified 120-170 HB
Typical Applications
AS/NZS 1594 HA250
Light structural sections, domestic appliances, agricultural equipment, general sheet metal fabrication, ducting.
EN 10025-2 S250
Used for fabricated structures, beams, support frames, machinery bases, towers, and construction components.
Can AS/NZS 1594 HA250 Be Substituted With EN 10025-2 S250?
AS/NZS 1594 HA250 and EN 10025-2 S250 overlap closely enough on chemistry and mechanical properties that EN 10025-2 S250 is often considered as a substitute for AS/NZS 1594 HA250 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
AS/NZS 1594 HA250
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
EN 10025-2 S250
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3300–3500 mm (129.92–137.8 in)
On M-EX Right Now
AS/NZS 1594 HA250
2 active listings and RFQs →
EN 10025-2 S250
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS 1594 HA250 and EN 10025-2 S250?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AS/NZS 1594 HA250 be substituted with EN 10025-2 S250?
AS/NZS 1594 HA250 and EN 10025-2 S250 overlap closely enough on chemistry and mechanical properties that EN 10025-2 S250 is often considered as a substitute for AS/NZS 1594 HA250 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.