Post Stock Login Register

AS/NZS 1594 HA250 vs IS 4367 36Si7

Related Material — 65% match based on chemical composition and mechanical property overlap.

AS/NZS 1594 HA250 (AS/NZS 1594:2025) and IS 4367 36Si7 (IS 4367:1991) are both steel grades. AS/NZS 1594 HA250 is classified under Structural Steel, while IS 4367 36Si7 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. AS/NZS 1594 HA250 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while IS 4367 36Si7 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, AS/NZS 1594 HA250 vs IS 4367 36Si7 is a 80.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With AS/NZS 1594 HA250:
ASTM A283C ASTM A1008 SS Grade 50 CSA G40.21 260W AS/NZS 1595 C350 AS/NZS 1595 C450 CSA G40.21 400W AS/NZS 3679.1 300 CSA G40.21 300W CSA G40.21 480W ASTM A1008 SS Grade 80 GOST 19281 09G2S CSA G40.21 350W
Match Breakdown
CHEMISTRY MATCH
80.1%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property AS/NZS 1594 HA250 IS 4367 36Si7
Standard AS/NZS 1594:2025 IS 4367:1991
Category Structural Steel Alloy Steel
C (%) max 0.17 0.33-0.40
Mn (%) max 1.2 0.80-1.00
Si (%) max 0.5 1.50-2.00
P (%) max 0.03 <=0.035
S (%) max 0.03 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS 1594 HA250 IS 4367 36Si7
Yield Strength 250 MPa min (AS/NZS 1594) Not specified
Tensile Strength Not specified 800-950 MPa
Hardness Not specified 235-280 HB
Hardness (soft annealed) Not specified <=217 HB
Condition Not specified Hardened and tempered, ruling section up to 100 mm
Typical Applications
AS/NZS 1594 HA250
Light structural sections, domestic appliances, agricultural equipment, general sheet metal fabrication, ducting.
IS 4367 36Si7
Not documented
Key Differences
Can AS/NZS 1594 HA250 Be Substituted With IS 4367 36Si7?
AS/NZS 1594 HA250 and IS 4367 36Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AS/NZS 1594 HA250
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
IS 4367 36Si7
No active listings currently.
On M-EX Right Now
AS/NZS 1594 HA250
2 active listings and RFQs →
IS 4367 36Si7
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS 1594 HA250 and IS 4367 36Si7?
Different category: AS/NZS 1594 HA250 is Structural Steel, IS 4367 36Si7 is Alloy Steel.
Can AS/NZS 1594 HA250 be substituted with IS 4367 36Si7?
AS/NZS 1594 HA250 and IS 4367 36Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.