Post Stock Login Register

AS/NZS 1594 HA250 vs IS 5517 46V1S3

Related Material — 65% match based on chemical composition and mechanical property overlap.

AS/NZS 1594 HA250 (AS/NZS 1594:2025) and IS 5517 46V1S3 (IS 5517:1993) are both steel grades. AS/NZS 1594 HA250 is classified under Structural Steel, while IS 5517 46V1S3 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. AS/NZS 1594 HA250 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while IS 5517 46V1S3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, AS/NZS 1594 HA250 vs IS 5517 46V1S3 is a 77.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With AS/NZS 1594 HA250:
ASTM A283C ASTM A1008 SS Grade 50 CSA G40.21 260W AS/NZS 1595 C350 AS/NZS 1595 C450 CSA G40.21 400W AS/NZS 3679.1 300 CSA G40.21 300W CSA G40.21 480W ASTM A1008 SS Grade 80 GOST 19281 09G2S CSA G40.21 350W
Match Breakdown
CHEMISTRY MATCH
77.7%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property AS/NZS 1594 HA250 IS 5517 46V1S3
Standard AS/NZS 1594:2025 IS 5517:1993
Category Structural Steel Alloy Steel
C (%) max 0.17 0.42-0.50
Mn (%) max 1.2 0.60-1.00
Si (%) max 0.5 <=0.60
P (%) max 0.03 <=0.035
S (%) max 0.03 0.045-0.065
V (%) Not specified 0.08-0.13
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS 1594 HA250 IS 5517 46V1S3
Yield Strength 250 MPa min (AS/NZS 1594) Not specified
Hardness (annealed) Not specified <=220 HB
Typical Applications
AS/NZS 1594 HA250
Light structural sections, domestic appliances, agricultural equipment, general sheet metal fabrication, ducting.
IS 5517 46V1S3
Not documented
Key Differences
Can AS/NZS 1594 HA250 Be Substituted With IS 5517 46V1S3?
AS/NZS 1594 HA250 and IS 5517 46V1S3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AS/NZS 1594 HA250
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
IS 5517 46V1S3
No active listings currently.
On M-EX Right Now
AS/NZS 1594 HA250
2 active listings and RFQs →
IS 5517 46V1S3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS 1594 HA250 and IS 5517 46V1S3?
Different category: AS/NZS 1594 HA250 is Structural Steel, IS 5517 46V1S3 is Alloy Steel. IS 5517 46V1S3 specifies V which is not specified for AS/NZS 1594 HA250.
Can AS/NZS 1594 HA250 be substituted with IS 5517 46V1S3?
AS/NZS 1594 HA250 and IS 5517 46V1S3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.