Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
AS/NZS 1595 C450 (AS/NZS 1595:1998) and GOST 19281 09G2S (GOST 19281-2014) are both steel grades.
Both fall under the Structural Steel category.
AS/NZS 1595 C450 is typically used for higher-strength cold-rolled structural steel sheet; roll-forming, purlins, high-strength cold-formed sections, while GOST 19281 09G2S is commonly used for used for bridges, pressure vessels, pipelines, structural frames, and heavy equipment components..
AS/NZS 1595 C450 is defined under Australian/New Zealand Standard (AS/NZS) (Australia/New Zealand).
As per chemical composition, AS/NZS 1595 C450 vs GOST 19281 09G2S is a 65.9% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Used for bridges, pressure vessels, pipelines, structural frames, and heavy equipment components.
Key Differences
GOST 19281 09G2S specifies Ni, Cr, Cu which are not specified for AS/NZS 1595 C450.
Can AS/NZS 1595 C450 Be Substituted With GOST 19281 09G2S?
AS/NZS 1595 C450 and GOST 19281 09G2S share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between AS/NZS 1595 C450 and GOST 19281 09G2S?
GOST 19281 09G2S specifies Ni, Cr, Cu which are not specified for AS/NZS 1595 C450.
Can AS/NZS 1595 C450 be substituted with GOST 19281 09G2S?
AS/NZS 1595 C450 and GOST 19281 09G2S share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.