AS/NZS 3678 Grade 300 vs CSA G40.21 300W

Close Alternative — 79.7% match based on chemical composition and mechanical property overlap.

AS/NZS 3678 Grade 300 (AS/NZS 3678:2016) and CSA G40.21 300W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. AS/NZS 3678 Grade 300 is typically used for general fabrication, structural members, high-rise buildings, bridges, storage tanks, while CSA G40.21 300W is commonly used for structural fabrication,bridges,buildings,machinery frames,general construction,welded structures. AS/NZS 3678 Grade 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while CSA G40.21 300W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, AS/NZS 3678 Grade 300 vs CSA G40.21 300W is a 93.2% match. As per mechanical properties, the match is 52.6%. Combined, this makes them a close alternative overall at 79.7%.

Frequently Compared With AS/NZS 3678 Grade 300:
AS/NZS 3679.1 350 AS/NZS 3679.1 300 CSA G40.21 480W ASTM A1008 SS Grade 80 CSA G40.21 400W GOST 19281 09G2S CSA G40.21 260W ASTM A1008 SS Grade 50 CSA G40.21 400A CSA G40.21 350W ASTM A283C ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
93.2%
MECHANICAL MATCH
52.6%
OVERALL
79.7%
Specifications
Property AS/NZS 3678 Grade 300 CSA G40.21 300W
Standard AS/NZS 3678:2016 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.22 <=0.23
Mn (%) <=1.70 <=1.50
Si (%) <=0.50 Not specified
P (%) <=0.040 <=0.040
S (%) <=0.040 <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS 3678 Grade 300 CSA G40.21 300W
Tensile Strength 430-560 MPa 450-620 MPa
Yield Strength 300 MPa min 300 MPa min
Elongation 22% min 20-23 %
Typical Applications
AS/NZS 3678 Grade 300
General fabrication, structural members, high-rise buildings, bridges, storage tanks
CSA G40.21 300W
structural fabrication,bridges,buildings,machinery frames,general construction,welded structures
Key Differences
Can AS/NZS 3678 Grade 300 Be Substituted With CSA G40.21 300W?
AS/NZS 3678 Grade 300 and CSA G40.21 300W are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
AS/NZS 3678 Grade 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3100 mm (98.43–122.05 in)
CSA G40.21 300W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2800 mm (106.3–110.24 in)
On M-EX Right Now
AS/NZS 3678 Grade 300
2 active listings and RFQs →
CSA G40.21 300W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS 3678 Grade 300 and CSA G40.21 300W?
AS/NZS 3678 Grade 300 specifies Si which is not specified for CSA G40.21 300W.
Can AS/NZS 3678 Grade 300 be substituted with CSA G40.21 300W?
AS/NZS 3678 Grade 300 and CSA G40.21 300W are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.