Post Stock Login Register

AS/NZS 3678 Grade 350 vs ASTM A283C

Related Material — 62.4% match based on chemical composition and mechanical property overlap.

AS/NZS 3678 Grade 350 (AS/NZS 3678:2016) and ASTM A283C (ASTM A283) are both steel grades. Both fall under the Structural Steel category. AS/NZS 3678 Grade 350 is typically used for bridges,heavy structures,mining equipment,cranes,offshore platforms,pressure vessels,structural components, while ASTM A283C is commonly used for used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures.. AS/NZS 3678 Grade 350 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while ASTM A283C is defined under ASTM International, originating from United States.

As per chemical composition, AS/NZS 3678 Grade 350 vs ASTM A283C is a 91.2% match. As per mechanical properties, the match is 4.9%. Combined, this makes them a related material overall at 62.4%.

Frequently Compared With AS/NZS 3678 Grade 350:
CSA G40.21 260W CSA G40.21 300W AS/NZS 3679.1 300 CSA G40.21 350W CSA G40.21 400A CSA G40.21 480W GOST 19281 09G2S CSA G40.21 400W AS/NZS 3679.1 350 ASTM A572 Gr.65 ASTM A1008 SS Grade 80 ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
91.2%
MECHANICAL MATCH
4.9%
OVERALL
62.4%
Specifications
Property AS/NZS 3678 Grade 350 ASTM A283C
Standard AS/NZS 3678:2016 ASTM A283
Category Structural Steel Structural Steel
C (%) <=0.22 0.24 max
Mn (%) <=1.70 0.90 max
P (%) <=0.040 0.035 max
S (%) <=0.040 0.040 max
Si (%) Not specified 0.40 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS 3678 Grade 350 ASTM A283C
Tensile Strength 480-620 MPa 380-515 MPa
Yield Strength 360 MPa min 205 MPa min
Elongation 18-22 % 23-27%
Hardness Not specified 120-170 HB
Typical Applications
AS/NZS 3678 Grade 350
bridges,heavy structures,mining equipment,cranes,offshore platforms,pressure vessels,structural components
ASTM A283C
Used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures.
Key Differences
Can AS/NZS 3678 Grade 350 Be Substituted With ASTM A283C?
AS/NZS 3678 Grade 350 and ASTM A283C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AS/NZS 3678 Grade 350
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3300–4500 mm (129.92–177.17 in)
ASTM A283C
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3700 mm (114.17–145.67 in)
On M-EX Right Now
AS/NZS 3678 Grade 350
2 active listings and RFQs →
ASTM A283C
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS 3678 Grade 350 and ASTM A283C?
ASTM A283C specifies Si which is not specified for AS/NZS 3678 Grade 350.
Can AS/NZS 3678 Grade 350 be substituted with ASTM A283C?
AS/NZS 3678 Grade 350 and ASTM A283C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.