Post Stock Login Register

ASTM A1008 SS Grade 50 vs AS/NZS 1595 C450

Related Material — 65.6% match based on chemical composition and mechanical property overlap.

ASTM A1008 SS Grade 50 (ASTM A1008) and AS/NZS 1595 C450 (AS/NZS 1595:1998) are both steel grades. Both fall under the Structural Steel category. ASTM A1008 SS Grade 50 is typically used for cold-rolled high-strength structural steel sheet; automotive structural components, cold-formed parts requiring moderate strength, while AS/NZS 1595 C450 is commonly used for higher-strength cold-rolled structural steel sheet; roll-forming, purlins, high-strength cold-formed sections. ASTM A1008 SS Grade 50 is defined under ASTM International, originating from United States, while AS/NZS 1595 C450 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, ASTM A1008 SS Grade 50 vs AS/NZS 1595 C450 is a 98.3% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 65.6%.

Frequently Compared With ASTM A1008 SS Grade 50:
GOST 19281 09G2S CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 400A ASTM A1008 SS Grade 80 AS/NZS 1595 C350 ASTM A283C AS/NZS 3679.1 300 CSA G40.21 400W CSA G40.21 260W CSA G40.21 350W CSA G40.21 480W
Match Breakdown
CHEMISTRY MATCH
98.3%
MECHANICAL MATCH
0%
OVERALL
65.6%
Specifications
Property ASTM A1008 SS Grade 50 AS/NZS 1595 C450
Standard ASTM A1008 AS/NZS 1595:1998
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.22
Mn (%) <=1.35 <=1.60
Si (%) <=0.50 <=0.50
P (%) <=0.040 <=0.040
S (%) <=0.040 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A1008 SS Grade 50 AS/NZS 1595 C450
Tensile Strength 380 MPa min 500 MPa min
Yield Strength 340 MPa min 450 MPa min
Elongation 14% min 12% min
Typical Applications
ASTM A1008 SS Grade 50
Cold-rolled high-strength structural steel sheet; automotive structural components, cold-formed parts requiring moderate strength
AS/NZS 1595 C450
Higher-strength cold-rolled structural steel sheet; roll-forming, purlins, high-strength cold-formed sections
Can ASTM A1008 SS Grade 50 Be Substituted With AS/NZS 1595 C450?
ASTM A1008 SS Grade 50 and AS/NZS 1595 C450 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A1008 SS Grade 50
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–3400 mm (106.3–133.86 in)
AS/NZS 1595 C450
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
On M-EX Right Now
ASTM A1008 SS Grade 50
2 active listings and RFQs →
AS/NZS 1595 C450
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A1008 SS Grade 50 and AS/NZS 1595 C450?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A1008 SS Grade 50 be substituted with AS/NZS 1595 C450?
ASTM A1008 SS Grade 50 and AS/NZS 1595 C450 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.