Post Stock Login Register

ASTM A1008 SS Grade 80 vs AS/NZS 3679.1 300

Related Material — 65.9% match based on chemical composition and mechanical property overlap.

ASTM A1008 SS Grade 80 (ASTM A1008) and AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. ASTM A1008 SS Grade 80 is typically used for cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts, while AS/NZS 3679.1 300 is commonly used for hot-rolled structural bars and sections for general structural framing. ASTM A1008 SS Grade 80 is defined under ASTM International, originating from United States, while AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, ASTM A1008 SS Grade 80 vs AS/NZS 3679.1 300 is a 98.8% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 65.9%.

Frequently Compared With ASTM A1008 SS Grade 80:
CSA G40.21 400W ASTM A1008 SS Grade 50 CSA G40.21 480W AS/NZS 1595 C450 CSA G40.21 400A GOST 19281 09G2S CSA G40.21 260W ASTM A283C AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 300W ASTM A572 Grade 50
Match Breakdown
CHEMISTRY MATCH
98.8%
MECHANICAL MATCH
0%
OVERALL
65.9%
Specifications
Property ASTM A1008 SS Grade 80 AS/NZS 3679.1 300
Standard ASTM A1008 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) <=0.25 <=0.22
Mn (%) <=1.65 <=1.70
Si (%) <=0.50 <=0.50
P (%) <=0.040 <=0.040
S (%) <=0.040 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A1008 SS Grade 80 AS/NZS 3679.1 300
Tensile Strength 570 MPa min 440-600 MPa
Yield Strength 550 MPa min 300 MPa min
Elongation 10% min 22% min
Typical Applications
ASTM A1008 SS Grade 80
Cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
Can ASTM A1008 SS Grade 80 Be Substituted With AS/NZS 3679.1 300?
ASTM A1008 SS Grade 80 and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A1008 SS Grade 80
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3700 mm (98.43–145.67 in)
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
On M-EX Right Now
ASTM A1008 SS Grade 80
2 active listings and RFQs →
AS/NZS 3679.1 300
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A1008 SS Grade 80 and AS/NZS 3679.1 300?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A1008 SS Grade 80 be substituted with AS/NZS 3679.1 300?
ASTM A1008 SS Grade 80 and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.