Post Stock Login Register

ASTM A240/A240M N08926 vs ASTM A240/A240M N08925

Close Alternative — 71% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M N08926 (ASTM A240/A240M:2025) and ASTM A240/A240M N08925 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M N08926 is typically used for pressure vessels and general applications (plate, sheet and strip), while ASTM A240/A240M N08925 is commonly used for pressure vessels and general applications (plate, sheet and strip). ASTM A240/A240M N08926 is defined under ASTM International, originating from United States, while ASTM A240/A240M N08925 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A240/A240M N08926 vs ASTM A240/A240M N08925 is a 89.9% match. As per mechanical properties, the match is 33.3%. Combined, this makes them a close alternative overall at 71%.

Frequently Compared With ASTM A240/A240M N08926:
EN 10088-1 1.4301 EN 10088-1 1.4845 GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 06Kh23N28 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
89.9%
MECHANICAL MATCH
33.3%
OVERALL
71%
Specifications
Property ASTM A240/A240M N08926 ASTM A240/A240M N08925
Standard ASTM A240/A240M:2025 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.020 <=0.020
Mn (%) <=2.00 <=1.00
P (%) <=0.030 <=0.045
S (%) <=0.010 <=0.030
Si (%) <=0.50 <=0.50
Cr (%) 19.0-21.0 19.0-21.0
Ni (%) 24.0-26.0 24.0-26.0
Mo (%) 6.00-7.00 6.00-7.00
N (%) 0.15-0.25 0.10-0.20
Cu (%) 0.50-1.50 0.80-1.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M N08926 ASTM A240/A240M N08925
Tensile Strength >=650 MPa >=600 MPa
Yield Strength >=295 MPa >=295 MPa
Elongation >=35% >=40%
Condition Plate, sheet and strip; yield by 0.2 percent offset Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
ASTM A240/A240M N08926
Pressure vessels and general applications (plate, sheet and strip)
ASTM A240/A240M N08925
Pressure vessels and general applications (plate, sheet and strip)
Can ASTM A240/A240M N08926 Be Substituted With ASTM A240/A240M N08925?
ASTM A240/A240M N08926 and ASTM A240/A240M N08925 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A240/A240M N08926
0 active listings and RFQs →
ASTM A240/A240M N08925
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M N08926 and ASTM A240/A240M N08925?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M N08926 be substituted with ASTM A240/A240M N08925?
ASTM A240/A240M N08926 and ASTM A240/A240M N08925 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.