Post Stock Login Register

ASTM A240/A240M N08932 vs EN 10088-1 X1CrNiMoCuN25-25-5

Strong Match — 89.1% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M N08932 (ASTM A240/A240M:2025) and EN 10088-1 X1CrNiMoCuN25-25-5 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M N08932 is defined under ASTM International, originating from United States, while EN 10088-1 X1CrNiMoCuN25-25-5 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M N08932 vs EN 10088-1 X1CrNiMoCuN25-25-5 is a 89.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.1%.

Frequently Compared With ASTM A240/A240M N08932:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
89.1%
MECHANICAL MATCH
No shared data
OVERALL
89.1%
Specifications
Property ASTM A240/A240M N08932 EN 10088-1 X1CrNiMoCuN25-25-5
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.020 <=0.020
Mn (%) <=2.00 <=2.00
P (%) <=0.025 <=0.030
S (%) <=0.010 <=0.010
Si (%) <=0.40 <=0.70
Cr (%) 24.0-26.0 24.0-26.0
Ni (%) 24.0-26.0 24.0-27.0
Mo (%) 4.5-6.5 4.7-5.7
N (%) 0.15-0.25 0.17-0.25
Cu (%) 1.0-2.0 1.00-2.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M N08932 EN 10088-1 X1CrNiMoCuN25-25-5
Tensile Strength >=600 MPa Not specified
Yield Strength >=305 MPa Not specified
Elongation >=40% Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M N08932
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X1CrNiMoCuN25-25-5
Not documented
Can ASTM A240/A240M N08932 Be Substituted With EN 10088-1 X1CrNiMoCuN25-25-5?
ASTM A240/A240M N08932 and EN 10088-1 X1CrNiMoCuN25-25-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X1CrNiMoCuN25-25-5 is often considered as a substitute for ASTM A240/A240M N08932 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A240/A240M N08932
0 active listings and RFQs →
EN 10088-1 X1CrNiMoCuN25-25-5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M N08932 and EN 10088-1 X1CrNiMoCuN25-25-5?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M N08932 be substituted with EN 10088-1 X1CrNiMoCuN25-25-5?
ASTM A240/A240M N08932 and EN 10088-1 X1CrNiMoCuN25-25-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X1CrNiMoCuN25-25-5 is often considered as a substitute for ASTM A240/A240M N08932 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.