Post Stock Login Register

ASTM A240/A240M:2025 S30415 Steel: Specifications & Listings

ASTM A240/A240M:2025 S30415: S30415: austenitic (chromium-nickel or chromium-manganese-nickel) stainless steel plate, sheet and strip (UNS number, no type name printed). Specified in ASTM A240/A240M:2025.

Category: Stainless Steel
Grade Details
GradeASTM A240/A240M:2025 S30415
Standard ASTM A240/A240M:2025
ApplicationsPressure vessels and general applications (plate, sheet and strip)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A959 S30415 ASTM A959:2011 USA No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A959 S30415 ASTM A959:2011 Strong Match
EN 10088-1 X6CrNiSiNCe19-10 EN 10088-1:2014 Close Alternative
EN 10088-1 X6CrNiSiNCe19-10 EN 10088-1:2023 Close Alternative
ASTM A959 304N ASTM A959:2011 Close Alternative
ASTM A240/A240M S30815 ASTM A240/A240M:2025 Close Alternative
EN 10088-1 X5CrNiN19-9 EN 10088-1:2014 Close Alternative
EN 10088-1 X5CrNiN19-9 EN 10088-1:2023 Close Alternative
BS 970 (Part 3) 304S15 BS 970 (Part 3):1991 Close Alternative
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn P S Si Cr Ni N Ce
0.04-0.06 <=0.80 <=0.045 <=0.030 1.00-2.00 18.0-19.0 9.0-10.0 0.12-0.18 0.03-0.08
Mechanical Properties
Tensile Strength >=600 MPa
Yield Strength >=290 MPa
Elongation >=40%
Hardness <=217 HB
Condition Plate, sheet and strip; yield by 0.2 percent offset

More data from ASTM A240/A240M:2025

From the standard
Mechanical properties 1 condition(s)
Product or thicknessTensile strength, min (MPa)Yield strength, min (MPa)Elongation in 50 mm, min (%)
All60029040
Minimum values; yield strength by the 0.2 percent offset method.
Source: ASTM A240/A240M:2025, Table 2
Hardness 1 condition(s)
Product or thicknessBrinell HBW, maxRockwell, max
All21795 HRBW
Maximum values; either Brinell or Rockwell scale may be used.
Source: ASTM A240/A240M:2025, Table 2
Cold bend 1 value
Cold bend angle
not required
Bend tests are not required for chromium steels thicker than 1 in. [25 mm] or for any austenitic or duplex steel regardless of thickness.
Source: ASTM A240/A240M:2025, Table 2

Active ASTM A240/A240M:2025 S30415 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A240/A240M:2025 S30415 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A240/A240M:2025 S30415

+ Post an RFQ for this grade

No open buyer requirements for ASTM A240/A240M:2025 S30415 at this time.

Register for Alerts