Post Stock Login Register

ASTM A240/A240M S30416 vs EN 10088-1 X2CrNiMo17-12-3

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S30416 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNiMo17-12-3 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S30416 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMo17-12-3 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S30416 vs EN 10088-1 X2CrNiMo17-12-3 is a 73.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S30416:
EN 10088-1 1.4006 EN 10088-1 1.4301 GOST 5632 08X18H10 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10
Match Breakdown
CHEMISTRY MATCH
73.8%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S30416 EN 10088-1 X2CrNiMo17-12-3
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.015
Si (%) 0.80-2.00 <=1.00
Cr (%) 17.5-19.5 16.5-18.5
Ni (%) 9.0-11.0 10.5-13.0
Mo (%) 0.40-0.80 2.50-3.00
N (%) <=0.10 <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S30416 EN 10088-1 X2CrNiMo17-12-3
Tensile Strength >=500 MPa Not specified
Yield Strength >=220 MPa Not specified
Elongation >=40% Not specified
Hardness <=217 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S30416
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNiMo17-12-3
Not documented
Can ASTM A240/A240M S30416 Be Substituted With EN 10088-1 X2CrNiMo17-12-3?
ASTM A240/A240M S30416 and EN 10088-1 X2CrNiMo17-12-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S30416
0 active listings and RFQs →
EN 10088-1 X2CrNiMo17-12-3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S30416 and EN 10088-1 X2CrNiMo17-12-3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M S30416 be substituted with EN 10088-1 X2CrNiMo17-12-3?
ASTM A240/A240M S30416 and EN 10088-1 X2CrNiMo17-12-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.