Post Stock Login Register

ASTM A240/A240M S30435 vs GB/T 3280 06Cr19Ni10

Related Material — 63.4% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S30435 (ASTM A240/A240M:2025) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S30435 is typically used for pressure vessels and general applications (plate, sheet and strip), while GB/T 3280 06Cr19Ni10 is commonly used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.. ASTM A240/A240M S30435 is defined under ASTM International, originating from United States, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, ASTM A240/A240M S30435 vs GB/T 3280 06Cr19Ni10 is a 82.6% match. As per mechanical properties, the match is 25%. Combined, this makes them a related material overall at 63.4%.

Frequently Compared With ASTM A240/A240M S30435:
EN 10088-1 1.4845 GOST 5632 06Kh23N28 ASTM A959 .- EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 ASTM A959 301 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
82.6%
MECHANICAL MATCH
25%
OVERALL
63.4%
Specifications
Property ASTM A240/A240M S30435 GB/T 3280 06Cr19Ni10
Standard ASTM A240/A240M:2025 GB/T 3280-2015
Category Stainless Steel Stainless Steel
C (%) <=0.08 0.08 max
Mn (%) <=2.00 2.00 max
P (%) <=0.045 0.045 max
S (%) <=0.030 0.030 max
Si (%) <=1.00 1.00 max
Cr (%) 16.0-18.0 18.00-20.00
Ni (%) 7.0-9.0 8.00-11.00
Cu (%) 1.50-3.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S30435 GB/T 3280 06Cr19Ni10
Tensile Strength >=450 MPa 520-720 MPa
Yield Strength >=155 MPa 205-310 MPa
Elongation >=45% 40-60%
Hardness <=187 HB 187 HB max
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S30435
Pressure vessels and general applications (plate, sheet and strip)
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Key Differences
Can ASTM A240/A240M S30435 Be Substituted With GB/T 3280 06Cr19Ni10?
ASTM A240/A240M S30435 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A240/A240M S30435
No active listings currently.
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
On M-EX Right Now
ASTM A240/A240M S30435
0 active listings and RFQs →
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S30435 and GB/T 3280 06Cr19Ni10?
ASTM A240/A240M S30435 specifies Cu which is not specified for GB/T 3280 06Cr19Ni10.
Can ASTM A240/A240M S30435 be substituted with GB/T 3280 06Cr19Ni10?
ASTM A240/A240M S30435 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.