Post Stock Login Register

ASTM A240/A240M S30601 vs ASTM A959 S30600

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S30601 (ASTM A240/A240M:2025) and ASTM A959 S30600 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S30601 is typically used for pressure vessels and general applications (plate, sheet and strip), while ASTM A959 S30600 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A240/A240M S30601 is defined under ASTM International, originating from United States, while ASTM A959 S30600 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A240/A240M S30601 vs ASTM A959 S30600 is a 74.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S30601:
GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoVH EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GOST 5632 06Kh23N28 GB/T 3280 06Cr19Ni10
Match Breakdown
CHEMISTRY MATCH
74.5%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S30601 ASTM A959 S30600
Standard ASTM A240/A240M:2025 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.015 <=0.018
Mn (%) 0.50-0.80 <=2.00
P (%) <=0.030 <=0.020
S (%) <=0.013 <=0.020
Si (%) 5.0-5.6 3.7-4.3
Cr (%) 17.0-18.0 17.0-18.5
Ni (%) 17.0-18.0 14.0-15.5
Mo (%) <=0.20 <=0.20
N (%) <=0.05 Not specified
Cu (%) <=0.35 <=0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S30601 ASTM A959 S30600
Tensile Strength >=540 MPa Not specified
Yield Strength >=255 MPa Not specified
Elongation >=30% Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S30601
Pressure vessels and general applications (plate, sheet and strip)
ASTM A959 S30600
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A240/A240M S30601 Be Substituted With ASTM A959 S30600?
ASTM A240/A240M S30601 and ASTM A959 S30600 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S30601
0 active listings and RFQs →
ASTM A959 S30600
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S30601 and ASTM A959 S30600?
ASTM A240/A240M S30601 specifies N which is not specified for ASTM A959 S30600.
Can ASTM A240/A240M S30601 be substituted with ASTM A959 S30600?
ASTM A240/A240M S30601 and ASTM A959 S30600 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.