Post Stock Login Register

ASTM A240/A240M S30926 vs EN 10088-1 X10CrNiMoMnNbVB15-10-1

Related Material — 59.3% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S30926 (ASTM A240/A240M:2025) and EN 10088-1 X10CrNiMoMnNbVB15-10-1 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S30926 is defined under ASTM International, originating from United States, while EN 10088-1 X10CrNiMoMnNbVB15-10-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S30926 vs EN 10088-1 X10CrNiMoMnNbVB15-10-1 is a 59.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 59.3%.

Frequently Compared With ASTM A240/A240M S30926:
GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
59.3%
MECHANICAL MATCH
No shared data
OVERALL
59.3%
Specifications
Property ASTM A240/A240M S30926 EN 10088-1 X10CrNiMoMnNbVB15-10-1
Standard ASTM A240/A240M:2025 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.10 0.07-0.13
Mn (%) 5.0-7.0 5.5-7.0
P (%) <=0.045 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Cr (%) 22.5-24.5 14.0-16.0
Ni (%) 9.0-11.0 9.0-11.0
Mo (%) 1.00-3.00 0.80-1.20
N (%) 0.40-0.60 <=0.10
V (%) 0.03-0.30 0.15-0.40
B (%) <=0.010 0.003-0.009
Nb (%) Not specified 0.75-1.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S30926 EN 10088-1 X10CrNiMoMnNbVB15-10-1
Tensile Strength >=800 MPa Not specified
Yield Strength >=400 MPa Not specified
Elongation >=35% Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S30926
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X10CrNiMoMnNbVB15-10-1
Not documented
Key Differences
Can ASTM A240/A240M S30926 Be Substituted With EN 10088-1 X10CrNiMoMnNbVB15-10-1?
ASTM A240/A240M S30926 and EN 10088-1 X10CrNiMoMnNbVB15-10-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S30926
0 active listings and RFQs →
EN 10088-1 X10CrNiMoMnNbVB15-10-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S30926 and EN 10088-1 X10CrNiMoMnNbVB15-10-1?
EN 10088-1 X10CrNiMoMnNbVB15-10-1 specifies Nb which is not specified for ASTM A240/A240M S30926.
Can ASTM A240/A240M S30926 be substituted with EN 10088-1 X10CrNiMoMnNbVB15-10-1?
ASTM A240/A240M S30926 and EN 10088-1 X10CrNiMoMnNbVB15-10-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.