Post Stock Login Register

ASTM A240/A240M S31050 vs EN 10088-1 X1CrNiMoN25-22-2

Strong Match — 89.4% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S31050 (ASTM A240/A240M:2025) and EN 10088-1 X1CrNiMoN25-22-2 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S31050 is defined under ASTM International, originating from United States, while EN 10088-1 X1CrNiMoN25-22-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S31050 vs EN 10088-1 X1CrNiMoN25-22-2 is a 89.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.4%.

Frequently Compared With ASTM A240/A240M S31050:
EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GB/T 3280 06Cr19Ni10
Match Breakdown
CHEMISTRY MATCH
89.4%
MECHANICAL MATCH
No shared data
OVERALL
89.4%
Specifications
Property ASTM A240/A240M S31050 EN 10088-1 X1CrNiMoN25-22-2
Standard ASTM A240/A240M:2025 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.020 <=0.020
Mn (%) <=2.00 <=2.00
P (%) <=0.030 <=0.025
S (%) <=0.010 <=0.010
Si (%) <=0.50 <=0.70
Cr (%) 24.0-26.0 24.0-26.0
Ni (%) 20.5-23.5 21.0-23.0
Mo (%) 1.60-2.60 2.00-2.50
N (%) 0.09-0.15 0.10-0.16
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S31050 EN 10088-1 X1CrNiMoN25-22-2
Tensile Strength >=580 MPa Not specified
Yield Strength >=270 MPa Not specified
Elongation >=25% Not specified
Hardness <=217 HB Not specified
Condition t <= 0.25 in. (first condition printed); yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S31050
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X1CrNiMoN25-22-2
Not documented
Can ASTM A240/A240M S31050 Be Substituted With EN 10088-1 X1CrNiMoN25-22-2?
ASTM A240/A240M S31050 and EN 10088-1 X1CrNiMoN25-22-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X1CrNiMoN25-22-2 is often considered as a substitute for ASTM A240/A240M S31050 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A240/A240M S31050
0 active listings and RFQs →
EN 10088-1 X1CrNiMoN25-22-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S31050 and EN 10088-1 X1CrNiMoN25-22-2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M S31050 be substituted with EN 10088-1 X1CrNiMoN25-22-2?
ASTM A240/A240M S31050 and EN 10088-1 X1CrNiMoN25-22-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X1CrNiMoN25-22-2 is often considered as a substitute for ASTM A240/A240M S31050 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.