Post Stock Login Register

ASTM A240/A240M S31653 vs EN 10088-1 X3CrNiMoBN17-13-3

Strong Match — 85.2% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S31653 (ASTM A240/A240M:2025) and EN 10088-1 X3CrNiMoBN17-13-3 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S31653 is defined under ASTM International, originating from United States, while EN 10088-1 X3CrNiMoBN17-13-3 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S31653 vs EN 10088-1 X3CrNiMoBN17-13-3 is a 85.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.2%.

Frequently Compared With ASTM A240/A240M S31653:
EN 10088-1 1.4006 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28
Match Breakdown
CHEMISTRY MATCH
85.2%
MECHANICAL MATCH
No shared data
OVERALL
85.2%
Specifications
Property ASTM A240/A240M S31653 EN 10088-1 X3CrNiMoBN17-13-3
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.04
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.035
S (%) <=0.030 <=0.015
Si (%) <=0.75 <=0.75
Cr (%) 16.0-18.0 16.0-18.0
Ni (%) 10.0-14.0 12.0-14.0
Mo (%) 2.00-3.00 2.00-3.00
N (%) 0.10-0.16 0.10-0.18
B (%) Not specified 0.0015-0.0050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S31653 EN 10088-1 X3CrNiMoBN17-13-3
Tensile Strength >=515 MPa Not specified
Yield Strength >=205 MPa Not specified
Elongation >=40% Not specified
Hardness <=217 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S31653
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X3CrNiMoBN17-13-3
Not documented
Key Differences
Can ASTM A240/A240M S31653 Be Substituted With EN 10088-1 X3CrNiMoBN17-13-3?
ASTM A240/A240M S31653 and EN 10088-1 X3CrNiMoBN17-13-3 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X3CrNiMoBN17-13-3 is often considered as a substitute for ASTM A240/A240M S31653 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A240/A240M S31653
0 active listings and RFQs →
EN 10088-1 X3CrNiMoBN17-13-3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S31653 and EN 10088-1 X3CrNiMoBN17-13-3?
EN 10088-1 X3CrNiMoBN17-13-3 specifies B which is not specified for ASTM A240/A240M S31653.
Can ASTM A240/A240M S31653 be substituted with EN 10088-1 X3CrNiMoBN17-13-3?
ASTM A240/A240M S31653 and EN 10088-1 X3CrNiMoBN17-13-3 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X3CrNiMoBN17-13-3 is often considered as a substitute for ASTM A240/A240M S31653 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.