Post Stock Login Register

ASTM A240/A240M S32001 vs EN 10088-1 X2CrMnNiSiN20-5-4-2

Close Alternative — 76.5% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S32001 (ASTM A240/A240M:2025) and EN 10088-1 X2CrMnNiSiN20-5-4-2 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S32001 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrMnNiSiN20-5-4-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S32001 vs EN 10088-1 X2CrMnNiSiN20-5-4-2 is a 76.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 76.5%.

Frequently Compared With ASTM A240/A240M S32001:
EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4401 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
76.5%
MECHANICAL MATCH
No shared data
OVERALL
76.5%
Specifications
Property ASTM A240/A240M S32001 EN 10088-1 X2CrMnNiSiN20-5-4-2
Standard ASTM A240/A240M:2025 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) 4.00-6.00 4.0-6.0
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.010
Si (%) <=1.00 1.50-3.00
Cr (%) 19.5-21.5 18.0-21.0
Ni (%) 1.00-3.00 3.00-5.5
Mo (%) <=0.60 <=0.60
N (%) 0.05-0.17 0.10-0.20
Cu (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S32001 EN 10088-1 X2CrMnNiSiN20-5-4-2
Tensile Strength >=620 MPa Not specified
Yield Strength >=450 MPa Not specified
Elongation >=25% Not specified
Hardness <=25 HRC Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S32001
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrMnNiSiN20-5-4-2
Not documented
Can ASTM A240/A240M S32001 Be Substituted With EN 10088-1 X2CrMnNiSiN20-5-4-2?
ASTM A240/A240M S32001 and EN 10088-1 X2CrMnNiSiN20-5-4-2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A240/A240M S32001
0 active listings and RFQs →
EN 10088-1 X2CrMnNiSiN20-5-4-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S32001 and EN 10088-1 X2CrMnNiSiN20-5-4-2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M S32001 be substituted with EN 10088-1 X2CrMnNiSiN20-5-4-2?
ASTM A240/A240M S32001 and EN 10088-1 X2CrMnNiSiN20-5-4-2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.