Post Stock Login Register

ASTM A240/A240M S32050 vs EN 10088-1 X2CrNiN22-2

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S32050 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNiN22-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S32050 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiN22-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S32050 vs EN 10088-1 X2CrNiN22-2 is a 73% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S32050:
GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 2304 GOST 5632 06Kh23N28 EN 10088-1 1.4845
Match Breakdown
CHEMISTRY MATCH
73%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S32050 EN 10088-1 X2CrNiN22-2
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) <=1.50 <=2.00
P (%) <=0.035 <=0.040
S (%) <=0.020 <=0.010
Si (%) <=1.00 <=1.00
Cr (%) 22.0-24.0 21.5-24.0
Ni (%) 20.0-23.0 1.00-2.90
Mo (%) 6.0-6.8 <=0.45
N (%) 0.21-0.32 0.16-0.28
Cu (%) <=0.40 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S32050 EN 10088-1 X2CrNiN22-2
Tensile Strength >=675 MPa Not specified
Yield Strength >=330 MPa Not specified
Elongation >=40% Not specified
Hardness <=250 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S32050
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNiN22-2
Not documented
Key Differences
Can ASTM A240/A240M S32050 Be Substituted With EN 10088-1 X2CrNiN22-2?
ASTM A240/A240M S32050 and EN 10088-1 X2CrNiN22-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S32050
0 active listings and RFQs →
EN 10088-1 X2CrNiN22-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S32050 and EN 10088-1 X2CrNiN22-2?
ASTM A240/A240M S32050 specifies Cu which is not specified for EN 10088-1 X2CrNiN22-2.
Can ASTM A240/A240M S32050 be substituted with EN 10088-1 X2CrNiN22-2?
ASTM A240/A240M S32050 and EN 10088-1 X2CrNiN22-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.