Post Stock Login Register

ASTM A240/A240M S32053 vs ASTM A959 2205

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S32053 (ASTM A240/A240M:2025) and ASTM A959 2205 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S32053 is typically used for pressure vessels and general applications (plate, sheet and strip), while ASTM A959 2205 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A240/A240M S32053 is defined under ASTM International, originating from United States, while ASTM A959 2205 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A240/A240M S32053 vs ASTM A959 2205 is a 71.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S32053:
GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
71.5%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S32053 ASTM A959 2205
Standard ASTM A240/A240M:2025 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) <=1.00 <=2.00
P (%) <=0.030 <=0.030
S (%) <=0.010 <=0.020
Si (%) <=1.00 <=1.00
Cr (%) 22.0-24.0 22.0-23.0
Ni (%) 24.0-26.0 4.5-6.5
Mo (%) 5.0-6.0 3.0-3.5
N (%) 0.17-0.22 0.14-0.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S32053 ASTM A959 2205
Tensile Strength >=640 MPa Not specified
Yield Strength >=295 MPa Not specified
Elongation >=40% Not specified
Hardness <=217 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S32053
Pressure vessels and general applications (plate, sheet and strip)
ASTM A959 2205
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can ASTM A240/A240M S32053 Be Substituted With ASTM A959 2205?
ASTM A240/A240M S32053 and ASTM A959 2205 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S32053
0 active listings and RFQs →
ASTM A959 2205
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S32053 and ASTM A959 2205?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M S32053 be substituted with ASTM A959 2205?
ASTM A240/A240M S32053 and ASTM A959 2205 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.