Post Stock Login Register

ASTM A240/A240M S32053 vs EN 10088-1 X1NiCrMoCuN25-20-7

Close Alternative — 70.8% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S32053 (ASTM A240/A240M:2025) and EN 10088-1 X1NiCrMoCuN25-20-7 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S32053 is defined under ASTM International, originating from United States, while EN 10088-1 X1NiCrMoCuN25-20-7 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S32053 vs EN 10088-1 X1NiCrMoCuN25-20-7 is a 70.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 70.8%.

Frequently Compared With ASTM A240/A240M S32053:
GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
70.8%
MECHANICAL MATCH
No shared data
OVERALL
70.8%
Specifications
Property ASTM A240/A240M S32053 EN 10088-1 X1NiCrMoCuN25-20-7
Standard ASTM A240/A240M:2025 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.020
Mn (%) <=1.00 <=2.00
P (%) <=0.030 <=0.030
S (%) <=0.010 <=0.010
Si (%) <=1.00 <=0.75
Cr (%) 22.0-24.0 19.0-21.0
Ni (%) 24.0-26.0 24.0-26.0
Mo (%) 5.0-6.0 6.0-7.0
N (%) 0.17-0.22 0.15-0.25
Cu (%) Not specified 0.50-1.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S32053 EN 10088-1 X1NiCrMoCuN25-20-7
Tensile Strength >=640 MPa Not specified
Yield Strength >=295 MPa Not specified
Elongation >=40% Not specified
Hardness <=217 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S32053
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X1NiCrMoCuN25-20-7
Not documented
Key Differences
Can ASTM A240/A240M S32053 Be Substituted With EN 10088-1 X1NiCrMoCuN25-20-7?
ASTM A240/A240M S32053 and EN 10088-1 X1NiCrMoCuN25-20-7 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A240/A240M S32053
0 active listings and RFQs →
EN 10088-1 X1NiCrMoCuN25-20-7
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S32053 and EN 10088-1 X1NiCrMoCuN25-20-7?
EN 10088-1 X1NiCrMoCuN25-20-7 specifies Cu which is not specified for ASTM A240/A240M S32053.
Can ASTM A240/A240M S32053 be substituted with EN 10088-1 X1NiCrMoCuN25-20-7?
ASTM A240/A240M S32053 and EN 10088-1 X1NiCrMoCuN25-20-7 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.