Post Stock Login Register

ASTM A240/A240M:2025 S32109 Steel: Specifications & Listings

ASTM A240/A240M:2025 S32109: S32109 (type 321H): austenitic (chromium-nickel or chromium-manganese-nickel) stainless steel plate, sheet and strip (UNS S32109). Specified in ASTM A240/A240M:2025.

Category: Stainless Steel
Grade Details
GradeASTM A240/A240M:2025 S32109
Standard ASTM A240/A240M:2025
ApplicationsPressure vessels and general applications (plate, sheet and strip)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A276/A276M S32100 ASTM A276/A276M:2017 USA No activity yet
ASTM A959 347H ASTM A959:2011 USA No activity yet
EN 10088-1 X7CrNiNb18-10 EN 10088-1:2014 Europe (CEN) No activity yet
ASTM A959 321H ASTM A959:2011 USA No activity yet
ASTM A959 348H ASTM A959:2011 USA No activity yet
ASTM A276/A276M S34700 ASTM A276/A276M:2017 USA No activity yet
ASTM A276/A276M S30500 ASTM A276/A276M:2017 USA No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A276/A276M S32100 ASTM A276/A276M:2017 Strong Match
ASTM A240/A240M S32100 ASTM A240/A240M:2025 Strong Match
ASTM A959 347H ASTM A959:2011 Strong Match
EN 10088-1 X7CrNiNb18-10 EN 10088-1:2014 Strong Match
EN 10088-1 X7CrNiNb18-10 EN 10088-1:2023 Strong Match
ASTM A959 321H ASTM A959:2011 Strong Match
ASTM A959 348H ASTM A959:2011 Strong Match
ASTM A276/A276M S34700 ASTM A276/A276M:2017 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn P S Si Cr Ni Ti
0.04-0.10 <=2.00 <=0.045 <=0.030 <=0.75 17.0-19.0 9.0-12.0 <=0.70
Mechanical Properties
Tensile Strength >=515 MPa
Yield Strength >=205 MPa
Elongation >=40%
Hardness <=217 HB
Condition Plate, sheet and strip; yield by 0.2 percent offset

More data from ASTM A240/A240M:2025

From the standard
Mechanical properties 1 condition(s)
Product or thicknessTensile strength, min (MPa)Yield strength, min (MPa)Elongation in 50 mm, min (%)
All51520540
Minimum values; yield strength by the 0.2 percent offset method.
Source: ASTM A240/A240M:2025, Table 2
Hardness 1 condition(s)
Product or thicknessBrinell HBW, maxRockwell, max
All21795 HRBW
Maximum values; either Brinell or Rockwell scale may be used.
Source: ASTM A240/A240M:2025, Table 2
Cold bend 1 value
Cold bend angle
not required
Bend tests are not required for chromium steels thicker than 1 in. [25 mm] or for any austenitic or duplex steel regardless of thickness.
Source: ASTM A240/A240M:2025, Table 2

Active ASTM A240/A240M:2025 S32109 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A240/A240M:2025 S32109 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A240/A240M:2025 S32109

+ Post an RFQ for this grade

No open buyer requirements for ASTM A240/A240M:2025 S32109 at this time.

Register for Alerts