Post Stock Login Register

ASTM A240/A240M S32654 vs EN 10088-1 X1CrNiMoN25-22-2

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S32654 (ASTM A240/A240M:2025) and EN 10088-1 X1CrNiMoN25-22-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S32654 is defined under ASTM International, originating from United States, while EN 10088-1 X1CrNiMoN25-22-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S32654 vs EN 10088-1 X1CrNiMoN25-22-2 is a 70.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S32654:
EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoVH GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
70.2%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S32654 EN 10088-1 X1CrNiMoN25-22-2
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.020 <=0.020
Mn (%) 2.00-4.00 <=2.00
P (%) <=0.030 <=0.025
S (%) <=0.005 <=0.010
Si (%) <=0.50 <=0.70
Cr (%) 24.0-25.0 24.0-26.0
Ni (%) 21.0-23.0 21.0-23.0
Mo (%) 7.0-8.0 2.00-2.50
N (%) 0.45-0.55 0.10-0.16
Cu (%) 0.30-0.60 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S32654 EN 10088-1 X1CrNiMoN25-22-2
Tensile Strength >=750 MPa Not specified
Yield Strength >=430 MPa Not specified
Elongation >=40% Not specified
Hardness <=250 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S32654
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X1CrNiMoN25-22-2
Not documented
Key Differences
Can ASTM A240/A240M S32654 Be Substituted With EN 10088-1 X1CrNiMoN25-22-2?
ASTM A240/A240M S32654 and EN 10088-1 X1CrNiMoN25-22-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S32654
0 active listings and RFQs →
EN 10088-1 X1CrNiMoN25-22-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S32654 and EN 10088-1 X1CrNiMoN25-22-2?
ASTM A240/A240M S32654 specifies Cu which is not specified for EN 10088-1 X1CrNiMoN25-22-2.
Can ASTM A240/A240M S32654 be substituted with EN 10088-1 X1CrNiMoN25-22-2?
ASTM A240/A240M S32654 and EN 10088-1 X1CrNiMoN25-22-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.