Post Stock Login Register

ASTM A240/A240M S32750 vs EN 10088-1 X2CrNiMoN25-7-4

Strong Match — 89.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S32750 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNiMoN25-7-4 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S32750 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMoN25-7-4 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S32750 vs EN 10088-1 X2CrNiMoN25-7-4 is a 89.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.9%.

Frequently Compared With ASTM A240/A240M S32750:
EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 2507 GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
89.9%
MECHANICAL MATCH
No shared data
OVERALL
89.9%
Specifications
Property ASTM A240/A240M S32750 EN 10088-1 X2CrNiMoN25-7-4
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) <=1.20 <=2.00
P (%) <=0.035 <=0.035
S (%) <=0.020 <=0.015
Si (%) <=0.80 <=1.00
Cr (%) 24.0-26.0 24.0-26.0
Ni (%) 6.0-8.0 6.0-8.0
Mo (%) 3.0-5.0 3.0-4.5
N (%) 0.24-0.32 0.24-0.35
Cu (%) <=0.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S32750 EN 10088-1 X2CrNiMoN25-7-4
Tensile Strength >=795 MPa Not specified
Yield Strength >=550 MPa Not specified
Elongation >=15% Not specified
Hardness <=310 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S32750
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNiMoN25-7-4
Not documented
Key Differences
Can ASTM A240/A240M S32750 Be Substituted With EN 10088-1 X2CrNiMoN25-7-4?
ASTM A240/A240M S32750 and EN 10088-1 X2CrNiMoN25-7-4 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMoN25-7-4 is often considered as a substitute for ASTM A240/A240M S32750 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A240/A240M S32750
0 active listings and RFQs →
EN 10088-1 X2CrNiMoN25-7-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S32750 and EN 10088-1 X2CrNiMoN25-7-4?
ASTM A240/A240M S32750 specifies Cu which is not specified for EN 10088-1 X2CrNiMoN25-7-4.
Can ASTM A240/A240M S32750 be substituted with EN 10088-1 X2CrNiMoN25-7-4?
ASTM A240/A240M S32750 and EN 10088-1 X2CrNiMoN25-7-4 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMoN25-7-4 is often considered as a substitute for ASTM A240/A240M S32750 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.