Post Stock Login Register

ASTM A240/A240M S32808 vs GB/T 3280 06Cr19Ni10

Minimal Match — 34% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S32808 (ASTM A240/A240M:2025) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S32808 is typically used for pressure vessels and general applications (plate, sheet and strip), while GB/T 3280 06Cr19Ni10 is commonly used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.. ASTM A240/A240M S32808 is defined under ASTM International, originating from United States, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, ASTM A240/A240M S32808 vs GB/T 3280 06Cr19Ni10 is a 51% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 34%.

Frequently Compared With ASTM A240/A240M S32808:
IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
51%
MECHANICAL MATCH
0%
OVERALL
34%
Specifications
Property ASTM A240/A240M S32808 GB/T 3280 06Cr19Ni10
Standard ASTM A240/A240M:2025 GB/T 3280-2015
Category Stainless Steel Stainless Steel
C (%) <=0.030 0.08 max
Mn (%) <=1.10 2.00 max
P (%) <=0.030 0.045 max
S (%) <=0.010 0.030 max
Si (%) <=0.50 1.00 max
Cr (%) 27.0-27.9 18.00-20.00
Ni (%) 7.0-8.2 8.00-11.00
Mo (%) 0.80-1.2 Not specified
N (%) 0.30-0.40 Not specified
W (%) 2.10-2.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S32808 GB/T 3280 06Cr19Ni10
Tensile Strength >=700 MPa 520-720 MPa
Yield Strength >=500 MPa 205-310 MPa
Elongation >=15% 40-60%
Hardness <=310 HB 187 HB max
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S32808
Pressure vessels and general applications (plate, sheet and strip)
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Key Differences
Can ASTM A240/A240M S32808 Be Substituted With GB/T 3280 06Cr19Ni10?
ASTM A240/A240M S32808 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A240/A240M S32808
No active listings currently.
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
On M-EX Right Now
ASTM A240/A240M S32808
0 active listings and RFQs →
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S32808 and GB/T 3280 06Cr19Ni10?
ASTM A240/A240M S32808 specifies Mo, N, W which are not specified for GB/T 3280 06Cr19Ni10.
Can ASTM A240/A240M S32808 be substituted with GB/T 3280 06Cr19Ni10?
ASTM A240/A240M S32808 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.