Post Stock Login Register

ASTM A240/A240M S33228 vs EN 10088-1 X6CrNi23-13

Related Material — 66.5% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S33228 (ASTM A240/A240M:2025) and EN 10088-1 X6CrNi23-13 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S33228 is defined under ASTM International, originating from United States, while EN 10088-1 X6CrNi23-13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S33228 vs EN 10088-1 X6CrNi23-13 is a 66.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 66.5%.

Frequently Compared With ASTM A240/A240M S33228:
ASTM A959 .- GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
66.5%
MECHANICAL MATCH
No shared data
OVERALL
66.5%
Specifications
Property ASTM A240/A240M S33228 EN 10088-1 X6CrNi23-13
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 0.04-0.08
Mn (%) <=1.00 <=2.00
P (%) <=0.020 <=0.035
S (%) <=0.015 <=0.015
Si (%) <=0.30 <=0.70
Cr (%) 26.0-28.0 22.0-24.0
Ni (%) 31.0-33.0 12.0-15.0
Ce (%) 0.05-0.10 Not specified
Nb (%) 0.6-1.0 Not specified
Al (%) <=0.025 Not specified
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S33228 EN 10088-1 X6CrNi23-13
Tensile Strength >=500 MPa Not specified
Yield Strength >=185 MPa Not specified
Elongation >=30% Not specified
Hardness <=217 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S33228
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X6CrNi23-13
Not documented
Key Differences
Can ASTM A240/A240M S33228 Be Substituted With EN 10088-1 X6CrNi23-13?
ASTM A240/A240M S33228 and EN 10088-1 X6CrNi23-13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S33228
0 active listings and RFQs →
EN 10088-1 X6CrNi23-13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S33228 and EN 10088-1 X6CrNi23-13?
ASTM A240/A240M S33228 specifies Ce, Nb, Al which are not specified for EN 10088-1 X6CrNi23-13. EN 10088-1 X6CrNi23-13 specifies N which is not specified for ASTM A240/A240M S33228.
Can ASTM A240/A240M S33228 be substituted with EN 10088-1 X6CrNi23-13?
ASTM A240/A240M S33228 and EN 10088-1 X6CrNi23-13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.