Post Stock Login Register

ASTM A240/A240M:2025 S33400 Steel: Specifications & Listings

ASTM A240/A240M:2025 S33400: S33400 (type 334): austenitic (chromium-nickel or chromium-manganese-nickel) stainless steel plate, sheet and strip (UNS S33400). Specified in ASTM A240/A240M:2025.

Category: Stainless Steel
Grade Details
GradeASTM A240/A240M:2025 S33400
Standard ASTM A240/A240M:2025
ApplicationsPressure vessels and general applications (plate, sheet and strip)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A959 334 ASTM A959:2011 USA No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A959 334 ASTM A959:2011 Strong Match
ASTM A959 SS304 ASTM A959:2011 Related Material
EN 10088-1 X5CrNi18-10 EN 10088-1:2014 Related Material
EN 10088-1 X8CrNi25-21 EN 10088-1:2014 Related Material
ASTM A959 304H ASTM A959:2011 Related Material
ASTM A959 304N ASTM A959:2011 Related Material
ASTM A959 XM-21 ASTM A959:2011 Related Material
ASTM A959 305 ASTM A959:2011 Related Material
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn P S Si Cr Ni Al Ti
<=0.08 <=1.00 <=0.030 <=0.015 <=1.00 18.0-20.0 19.0-21.0 0.15-0.60 0.15-0.60
Mechanical Properties
Tensile Strength >=485 MPa
Yield Strength >=170 MPa
Elongation >=30%
Hardness <=92 HRBW
Condition Plate, sheet and strip; yield by 0.2 percent offset

More data from ASTM A240/A240M:2025

From the standard
Mechanical properties 1 condition(s)
Product or thicknessTensile strength, min (MPa)Yield strength, min (MPa)Elongation in 50 mm, min (%)
All48517030
Minimum values; yield strength by the 0.2 percent offset method.
Source: ASTM A240/A240M:2025, Table 2
Hardness 1 condition(s)
Product or thicknessBrinell HBW, maxRockwell, max
All-92 HRBW
Maximum values; either Brinell or Rockwell scale may be used.
Source: ASTM A240/A240M:2025, Table 2
Cold bend 1 value
Cold bend angle
not required
Bend tests are not required for chromium steels thicker than 1 in. [25 mm] or for any austenitic or duplex steel regardless of thickness.
Source: ASTM A240/A240M:2025, Table 2

Active ASTM A240/A240M:2025 S33400 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A240/A240M:2025 S33400 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A240/A240M:2025 S33400

+ Post an RFQ for this grade

No open buyer requirements for ASTM A240/A240M:2025 S33400 at this time.

Register for Alerts