Post Stock Login Register

ASTM A240/A240M S34752 vs EN 10088-1 X2CrNiMo17-12-2

Related Material — 63.3% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S34752 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNiMo17-12-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S34752 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMo17-12-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S34752 vs EN 10088-1 X2CrNiMo17-12-2 is a 63.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 63.3%.

Frequently Compared With ASTM A240/A240M S34752:
GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
63.3%
MECHANICAL MATCH
No shared data
OVERALL
63.3%
Specifications
Property ASTM A240/A240M S34752 EN 10088-1 X2CrNiMo17-12-2
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.005-0.02 <=0.030
Mn (%) <=2.00 <=2.00
P (%) <=0.035 <=0.045
S (%) <=0.010 <=0.015
Si (%) <=0.60 <=1.00
Cr (%) 17.0-19.0 16.5-18.5
Ni (%) 10.0-13.0 10.0-13.0
Mo (%) 0.20-1.20 2.00-2.50
N (%) 0.06-0.12 <=0.10
Cu (%) 2.50-3.50 Not specified
Nb (%) 0.20-0.50 Not specified
B (%) 0.001-0.005 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S34752 EN 10088-1 X2CrNiMo17-12-2
Tensile Strength >=515 MPa Not specified
Yield Strength >=205 MPa Not specified
Elongation >=35% Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S34752
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNiMo17-12-2
Not documented
Key Differences
Can ASTM A240/A240M S34752 Be Substituted With EN 10088-1 X2CrNiMo17-12-2?
ASTM A240/A240M S34752 and EN 10088-1 X2CrNiMo17-12-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S34752
0 active listings and RFQs →
EN 10088-1 X2CrNiMo17-12-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S34752 and EN 10088-1 X2CrNiMo17-12-2?
ASTM A240/A240M S34752 specifies Cu, Nb, B which are not specified for EN 10088-1 X2CrNiMo17-12-2.
Can ASTM A240/A240M S34752 be substituted with EN 10088-1 X2CrNiMo17-12-2?
ASTM A240/A240M S34752 and EN 10088-1 X2CrNiMo17-12-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.