Post Stock Login Register

ASTM A240/A240M S35045 vs EN 10088-1 X10NiCrAlTi32-21

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S35045 (ASTM A240/A240M:2025) and EN 10088-1 X10NiCrAlTi32-21 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S35045 is defined under ASTM International, originating from United States, while EN 10088-1 X10NiCrAlTi32-21 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S35045 vs EN 10088-1 X10NiCrAlTi32-21 is a 75.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S35045:
EN 10088-1 1.4301 EN 10088-1 1.4845 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
75.3%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S35045 EN 10088-1 X10NiCrAlTi32-21
Standard ASTM A240/A240M:2025 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.06-0.10 <=0.12
Mn (%) <=1.50 <=2.00
P (%) <=0.045 <=0.030
S (%) <=0.015 <=0.015
Si (%) <=1.00 <=1.00
Cr (%) 25.0-29.0 19.0-23.0
Ni (%) 32.0-37.0 30.0-34.0
Cu (%) <=0.75 Not specified
Al (%) 0.15-0.60 0.15-0.60
Ti (%) 0.15-0.60 0.15-0.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S35045 EN 10088-1 X10NiCrAlTi32-21
Tensile Strength >=485 MPa Not specified
Yield Strength >=170 MPa Not specified
Elongation >=35% Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S35045
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X10NiCrAlTi32-21
Not documented
Key Differences
Can ASTM A240/A240M S35045 Be Substituted With EN 10088-1 X10NiCrAlTi32-21?
ASTM A240/A240M S35045 and EN 10088-1 X10NiCrAlTi32-21 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S35045
0 active listings and RFQs →
EN 10088-1 X10NiCrAlTi32-21
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S35045 and EN 10088-1 X10NiCrAlTi32-21?
ASTM A240/A240M S35045 specifies Cu which is not specified for EN 10088-1 X10NiCrAlTi32-21.
Can ASTM A240/A240M S35045 be substituted with EN 10088-1 X10NiCrAlTi32-21?
ASTM A240/A240M S35045 and EN 10088-1 X10NiCrAlTi32-21 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.