Post Stock Login Register

ASTM A240/A240M S35115 vs EN 10088-1 X2CrNiMnMoCuN24-4-3-2

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S35115 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNiMnMoCuN24-4-3-2 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S35115 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMnMoCuN24-4-3-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S35115 vs EN 10088-1 X2CrNiMnMoCuN24-4-3-2 is a 70.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S35115:
GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
70.5%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S35115 EN 10088-1 X2CrNiMnMoCuN24-4-3-2
Standard ASTM A240/A240M:2025 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) <=1.00 2.50-4.0
P (%) <=0.045 <=0.035
S (%) <=0.015 <=0.005
Si (%) 0.50-1.50 <=0.70
Cr (%) 23.0-25.0 23.0-25.0
Ni (%) 19.0-22.0 3.00-4.5
Mo (%) 1.50-2.50 1.00-2.00
N (%) 0.20-0.30 0.20-0.30
Cu (%) Not specified 0.10-0.80
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S35115 EN 10088-1 X2CrNiMnMoCuN24-4-3-2
Tensile Strength >=585 MPa Not specified
Yield Strength >=275 MPa Not specified
Elongation >=40% Not specified
Hardness <=241 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S35115
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNiMnMoCuN24-4-3-2
Not documented
Key Differences
Can ASTM A240/A240M S35115 Be Substituted With EN 10088-1 X2CrNiMnMoCuN24-4-3-2?
ASTM A240/A240M S35115 and EN 10088-1 X2CrNiMnMoCuN24-4-3-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S35115
0 active listings and RFQs →
EN 10088-1 X2CrNiMnMoCuN24-4-3-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S35115 and EN 10088-1 X2CrNiMnMoCuN24-4-3-2?
EN 10088-1 X2CrNiMnMoCuN24-4-3-2 specifies Cu which is not specified for ASTM A240/A240M S35115.
Can ASTM A240/A240M S35115 be substituted with EN 10088-1 X2CrNiMnMoCuN24-4-3-2?
ASTM A240/A240M S35115 and EN 10088-1 X2CrNiMnMoCuN24-4-3-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.