Post Stock Login Register

ASTM A240/A240M S35125 vs EN 10088-1 X6CrNiMoTi17-12-2

Related Material — 65% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S35125 (ASTM A240/A240M:2025) and EN 10088-1 X6CrNiMoTi17-12-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S35125 is defined under ASTM International, originating from United States, while EN 10088-1 X6CrNiMoTi17-12-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S35125 vs EN 10088-1 X6CrNiMoTi17-12-2 is a 65% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With ASTM A240/A240M S35125:
EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH GOST 5632 08X18H10 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
65%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property ASTM A240/A240M S35125 EN 10088-1 X6CrNiMoTi17-12-2
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.10 <=0.08
Mn (%) 1.00-1.50 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.015
Si (%) <=0.50 <=1.00
Cr (%) 20.0-23.0 16.5-18.5
Ni (%) 31.0-35.0 10.5-13.5
Mo (%) 2.00-3.00 2.00-2.50
Nb (%) 0.25-0.60 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S35125 EN 10088-1 X6CrNiMoTi17-12-2
Tensile Strength >=485 MPa Not specified
Yield Strength >=205 MPa Not specified
Elongation >=35% Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S35125
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X6CrNiMoTi17-12-2
Not documented
Key Differences
Can ASTM A240/A240M S35125 Be Substituted With EN 10088-1 X6CrNiMoTi17-12-2?
ASTM A240/A240M S35125 and EN 10088-1 X6CrNiMoTi17-12-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S35125
0 active listings and RFQs →
EN 10088-1 X6CrNiMoTi17-12-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S35125 and EN 10088-1 X6CrNiMoTi17-12-2?
ASTM A240/A240M S35125 specifies Nb which is not specified for EN 10088-1 X6CrNiMoTi17-12-2.
Can ASTM A240/A240M S35125 be substituted with EN 10088-1 X6CrNiMoTi17-12-2?
ASTM A240/A240M S35125 and EN 10088-1 X6CrNiMoTi17-12-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.