Post Stock Login Register

ASTM A240/A240M S40975 vs EN 10088-1 X2CrNi12

Strong Match — 85.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S40975 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNi12 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S40975 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNi12 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S40975 vs EN 10088-1 X2CrNi12 is a 85.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.9%.

Frequently Compared With ASTM A240/A240M S40975:
GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
85.9%
MECHANICAL MATCH
No shared data
OVERALL
85.9%
Specifications
Property ASTM A240/A240M S40975 EN 10088-1 X2CrNi12
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) <=1.00 <=1.50
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.015
Si (%) <=1.00 <=1.00
Cr (%) 10.5-11.7 10.5-12.5
Ni (%) 0.50-1.00 0.30-1.00
N (%) <=0.030 <=0.030
Ti (%) <=0.75 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S40975 EN 10088-1 X2CrNi12
Tensile Strength >=415 MPa Not specified
Yield Strength >=275 MPa Not specified
Elongation >=20% Not specified
Hardness <=197 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S40975
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNi12
Not documented
Key Differences
Can ASTM A240/A240M S40975 Be Substituted With EN 10088-1 X2CrNi12?
ASTM A240/A240M S40975 and EN 10088-1 X2CrNi12 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNi12 is often considered as a substitute for ASTM A240/A240M S40975 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A240/A240M S40975
0 active listings and RFQs →
EN 10088-1 X2CrNi12
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S40975 and EN 10088-1 X2CrNi12?
ASTM A240/A240M S40975 specifies Ti which is not specified for EN 10088-1 X2CrNi12.
Can ASTM A240/A240M S40975 be substituted with EN 10088-1 X2CrNi12?
ASTM A240/A240M S40975 and EN 10088-1 X2CrNi12 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNi12 is often considered as a substitute for ASTM A240/A240M S40975 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.