Post Stock Login Register

ASTM A240/A240M:2025 S41000 Steel: Specifications & Listings

ASTM A240/A240M:2025 S41000: S41000 (type 410): ferritic or martensitic (chromium) stainless steel plate, sheet and strip (UNS S41000). Specified in ASTM A240/A240M:2025.

Category: Stainless Steel
Grade Details
GradeASTM A240/A240M:2025 S41000
Standard ASTM A240/A240M:2025
ApplicationsPressure vessels and general applications (plate, sheet and strip)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A959 SS410 ASTM A959:2011 USA 3 listings, 0 RFQs →
ASTM A959 414 ASTM A959:2011 USA No activity yet
BS 970 (Part 1) 410S21 BS 970 (Part 1):1991 UK No activity yet
BS 970 (Part 1) 420S29 BS 970 (Part 1):1991 UK No activity yet
EN 10088-1 X12Cr13 EN 10088-1:2023 Europe (CEN) No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 1570 (Part 5) X12Cr12 IS 1570 (Part 5):1985 Strong Match
EN 10088-1 X12Cr13 EN 10088-1:2014 Strong Match
EN 10088-1 X12Cr13 EN 10088-1:2023 Strong Match
BS 970 (Part 1) 410S21 BS 970 (Part 1):1991 Strong Match
BS 970 (Part 3) 410S21 BS 970 (Part 3):1991 Strong Match
BS 970 (Part 1) 410S21 BS 970 (Part 1):1983 Strong Match
BS 970 (Part 1) 420S29 BS 970 (Part 1):1991 Strong Match
BS 970 (Part 3) 420S29 BS 970 (Part 3):1991 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn P S Si Cr Ni
0.08-0.15 <=1.00 <=0.040 <=0.030 <=1.00 11.5-13.5 <=0.75
Mechanical Properties
Tensile Strength >=450 MPa
Yield Strength >=205 MPa
Elongation >=20%
Hardness <=217 HB
Condition Plate, sheet and strip; yield by 0.2 percent offset

More data from ASTM A240/A240M:2025

From the standard
Mechanical properties 1 condition(s)
Product or thicknessTensile strength, min (MPa)Yield strength, min (MPa)Elongation in 50 mm, min (%)
All45020520
Minimum values; yield strength by the 0.2 percent offset method.
Source: ASTM A240/A240M:2025, Table 2
Hardness 1 condition(s)
Product or thicknessBrinell HBW, maxRockwell, max
All21796 HRBW
Maximum values; either Brinell or Rockwell scale may be used.
Source: ASTM A240/A240M:2025, Table 2
Cold bend 1 value
Cold bend angle
180 deg
Bend tests are not required for chromium steels thicker than 1 in. [25 mm] or for any austenitic or duplex steel regardless of thickness.
Source: ASTM A240/A240M:2025, Table 2

Active ASTM A240/A240M:2025 S41000 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A240/A240M:2025 S41000 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A240/A240M:2025 S41000

+ Post an RFQ for this grade

No open buyer requirements for ASTM A240/A240M:2025 S41000 at this time.

Register for Alerts