Post Stock Login Register

ASTM A240/A240M S43600 vs EN 10088-1 X6CrMoS17

Close Alternative — 77.2% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S43600 (ASTM A240/A240M:2025) and EN 10088-1 X6CrMoS17 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S43600 is defined under ASTM International, originating from United States, while EN 10088-1 X6CrMoS17 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S43600 vs EN 10088-1 X6CrMoS17 is a 77.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 77.2%.

Frequently Compared With ASTM A240/A240M S43600:
EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 08X18H10 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 ASTM A959 .- GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
77.2%
MECHANICAL MATCH
No shared data
OVERALL
77.2%
Specifications
Property ASTM A240/A240M S43600 EN 10088-1 X6CrMoS17
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.12 <=0.08
Mn (%) <=1.00 <=1.50
P (%) <=0.040 <=0.040
S (%) <=0.030 0.15-0.35
Si (%) <=1.00 <=1.50
Cr (%) 16.0-18.0 16.0-18.0
Mo (%) 0.75-1.25 0.20-0.60
Nb (%) <=0.80 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S43600 EN 10088-1 X6CrMoS17
Tensile Strength >=450 MPa Not specified
Yield Strength >=240 MPa Not specified
Elongation >=22% Not specified
Hardness <=89 HRBW Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S43600
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X6CrMoS17
Not documented
Key Differences
Can ASTM A240/A240M S43600 Be Substituted With EN 10088-1 X6CrMoS17?
ASTM A240/A240M S43600 and EN 10088-1 X6CrMoS17 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A240/A240M S43600
0 active listings and RFQs →
EN 10088-1 X6CrMoS17
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S43600 and EN 10088-1 X6CrMoS17?
ASTM A240/A240M S43600 specifies Nb which is not specified for EN 10088-1 X6CrMoS17.
Can ASTM A240/A240M S43600 be substituted with EN 10088-1 X6CrMoS17?
ASTM A240/A240M S43600 and EN 10088-1 X6CrMoS17 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.