Post Stock Login Register

ASTM A240/A240M S44330 vs EN 10088-1 X2CrNbTi20

Close Alternative — 80.8% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S44330 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNbTi20 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S44330 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNbTi20 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S44330 vs EN 10088-1 X2CrNbTi20 is a 80.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 80.8%.

Frequently Compared With ASTM A240/A240M S44330:
GOST 5632 08X18H10 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
80.8%
MECHANICAL MATCH
No shared data
OVERALL
80.8%
Specifications
Property ASTM A240/A240M S44330 EN 10088-1 X2CrNbTi20
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.025 <=0.030
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.015
Si (%) <=1.00 <=1.00
Cr (%) 20.0-23.0 18.5-20.5
N (%) <=0.025 <=0.030
Cu (%) 0.30-0.80 Not specified
Nb (%) Not specified <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S44330 EN 10088-1 X2CrNbTi20
Tensile Strength >=390 MPa Not specified
Yield Strength >=205 MPa Not specified
Elongation >=22% Not specified
Hardness <=187 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S44330
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNbTi20
Not documented
Key Differences
Can ASTM A240/A240M S44330 Be Substituted With EN 10088-1 X2CrNbTi20?
ASTM A240/A240M S44330 and EN 10088-1 X2CrNbTi20 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A240/A240M S44330
0 active listings and RFQs →
EN 10088-1 X2CrNbTi20
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S44330 and EN 10088-1 X2CrNbTi20?
ASTM A240/A240M S44330 specifies Cu which is not specified for EN 10088-1 X2CrNbTi20. EN 10088-1 X2CrNbTi20 specifies Nb which is not specified for ASTM A240/A240M S44330.
Can ASTM A240/A240M S44330 be substituted with EN 10088-1 X2CrNbTi20?
ASTM A240/A240M S44330 and EN 10088-1 X2CrNbTi20 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.