Post Stock Login Register

ASTM A240/A240M S44537 vs GOST 5632 08X18H10

Minimal Match — 30.6% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S44537 (ASTM A240/A240M:2025) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S44537 is typically used for pressure vessels and general applications (plate, sheet and strip), while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. ASTM A240/A240M S44537 is defined under ASTM International (United States).

As per chemical composition, ASTM A240/A240M S44537 vs GOST 5632 08X18H10 is a 46% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 30.6%.

Frequently Compared With ASTM A240/A240M S44537:
ASTM A959 .- EN 10088-1 1.4301 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr13H GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
46%
MECHANICAL MATCH
0%
OVERALL
30.6%
Specifications
Property ASTM A240/A240M S44537 GOST 5632 08X18H10
Standard ASTM A240/A240M:2025 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 ≤0.08
Mn (%) <=0.8 ≤2.00
P (%) <=0.050 ≤0.035
S (%) <=0.006 ≤0.020
Si (%) 0.1-0.6 ≤0.80
Cr (%) 20.0-24.0 17.0–19.0
Ni (%) <=0.5 9.0–11.0
N (%) <=0.04 Not specified
Cu (%) <=0.5 Not specified
Al (%) <=0.1 Not specified
W (%) 1.0-3.0 Not specified
Nb (%) 0.2-1.0 Not specified
Ti (%) 0.02-0.20 Not specified
La (%) 0.04-0.20 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S44537 GOST 5632 08X18H10
Tensile Strength >=450 MPa ≥520 MPa
Yield Strength >=320 MPa ≥205 MPa
Elongation >=18% ≥40%
Hardness <=200 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S44537
Pressure vessels and general applications (plate, sheet and strip)
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
Can ASTM A240/A240M S44537 Be Substituted With GOST 5632 08X18H10?
ASTM A240/A240M S44537 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A240/A240M S44537
No active listings currently.
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
ASTM A240/A240M S44537
0 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S44537 and GOST 5632 08X18H10?
ASTM A240/A240M S44537 specifies N, Cu, Al, W which are not specified for GOST 5632 08X18H10.
Can ASTM A240/A240M S44537 be substituted with GOST 5632 08X18H10?
ASTM A240/A240M S44537 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.