Post Stock Login Register

ASTM A240/A240M S44600 vs ASTM A240/A240M S44200

Strong Match — 88.7% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S44600 (ASTM A240/A240M:2025) and ASTM A240/A240M S44200 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S44600 is typically used for pressure vessels and general applications (plate, sheet and strip), while ASTM A240/A240M S44200 is commonly used for pressure vessels and general applications (plate, sheet and strip). ASTM A240/A240M S44600 is defined under ASTM International, originating from United States, while ASTM A240/A240M S44200 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A240/A240M S44600 vs ASTM A240/A240M S44200 is a 83% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 88.7%.

Frequently Compared With ASTM A240/A240M S44600:
GOST 5632 06Kh23N28 EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
83%
MECHANICAL MATCH
100%
OVERALL
88.7%
Specifications
Property ASTM A240/A240M S44600 ASTM A240/A240M S44200
Standard ASTM A240/A240M:2025 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.20 <=0.20
Mn (%) <=1.50 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.040
Si (%) <=1.00 <=1.00
Cr (%) 23.0-27.0 18.0-23.0
Ni (%) <=0.75 <=0.60
N (%) <=0.25 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S44600 ASTM A240/A240M S44200
Tensile Strength >=515 MPa >=515 MPa
Yield Strength >=275 MPa >=275 MPa
Elongation >=20% >=20%
Hardness <=217 HB <=217 HB
Condition Plate, sheet and strip; yield by 0.2 percent offset Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
ASTM A240/A240M S44600
Pressure vessels and general applications (plate, sheet and strip)
ASTM A240/A240M S44200
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can ASTM A240/A240M S44600 Be Substituted With ASTM A240/A240M S44200?
ASTM A240/A240M S44600 and ASTM A240/A240M S44200 overlap closely enough on chemistry and mechanical properties that ASTM A240/A240M S44200 is often considered as a substitute for ASTM A240/A240M S44600 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A240/A240M S44600
0 active listings and RFQs →
ASTM A240/A240M S44200
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S44600 and ASTM A240/A240M S44200?
ASTM A240/A240M S44600 specifies N which is not specified for ASTM A240/A240M S44200.
Can ASTM A240/A240M S44600 be substituted with ASTM A240/A240M S44200?
ASTM A240/A240M S44600 and ASTM A240/A240M S44200 overlap closely enough on chemistry and mechanical properties that ASTM A240/A240M S44200 is often considered as a substitute for ASTM A240/A240M S44600 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.