Post Stock Login Register

ASTM A240/A240M S44627 vs ASTM A959 29-4-2

Related Material — 62.6% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S44627 (ASTM A240/A240M:2025) and ASTM A959 29-4-2 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S44627 is typically used for pressure vessels and general applications (plate, sheet and strip), while ASTM A959 29-4-2 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A240/A240M S44627 is defined under ASTM International, originating from United States, while ASTM A959 29-4-2 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A240/A240M S44627 vs ASTM A959 29-4-2 is a 62.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.6%.

Frequently Compared With ASTM A240/A240M S44627:
ASTM A959 29-4 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
62.6%
MECHANICAL MATCH
No shared data
OVERALL
62.6%
Specifications
Property ASTM A240/A240M S44627 ASTM A959 29-4-2
Standard ASTM A240/A240M:2025 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.010 <=0.010
Mn (%) <=0.40 <=0.30
P (%) <=0.020 <=0.025
S (%) <=0.020 <=0.020
Si (%) <=0.40 <=0.20
Cr (%) 25.0-27.5 28.0-30.0
Ni (%) <=0.50 2.00-2.50
Mo (%) 0.75-1.50 3.5-4.2
N (%) <=0.015 <=0.020
Cu (%) <=0.20 <=0.15
Nb (%) 0.05-0.20 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S44627 ASTM A959 29-4-2
Tensile Strength >=450 MPa Not specified
Yield Strength >=275 MPa Not specified
Elongation >=22% Not specified
Hardness <=187 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S44627
Pressure vessels and general applications (plate, sheet and strip)
ASTM A959 29-4-2
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A240/A240M S44627 Be Substituted With ASTM A959 29-4-2?
ASTM A240/A240M S44627 and ASTM A959 29-4-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S44627
0 active listings and RFQs →
ASTM A959 29-4-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S44627 and ASTM A959 29-4-2?
ASTM A240/A240M S44627 specifies Nb which is not specified for ASTM A959 29-4-2.
Can ASTM A240/A240M S44627 be substituted with ASTM A959 29-4-2?
ASTM A240/A240M S44627 and ASTM A959 29-4-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.