Post Stock Login Register

ASTM A240/A240M:2025 S44660 Steel: Specifications & Listings

ASTM A240/A240M:2025 S44660: S44660: ferritic or martensitic (chromium) stainless steel plate, sheet and strip (UNS number, no type name printed). Specified in ASTM A240/A240M:2025. Combined limit (percent): Ti + Nb 0.20-1.00.

Category: Stainless Steel
Grade Details
GradeASTM A240/A240M:2025 S44660
Standard ASTM A240/A240M:2025
ApplicationsPressure vessels and general applications (plate, sheet and strip)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A959 26-3-3 ASTM A959:2011 USA No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A959 26-3-3 ASTM A959:2011 Strong Match
ASTM A959 29-4C ASTM A959:2011 Close Alternative
ASTM A959 25-4-4 ASTM A959:2011 Close Alternative
ASTM A959 255 ASTM A959:2011 Close Alternative
ASTM A959 316L ASTM A959:2011 Related Material
ASTM A959 317L ASTM A959:2011 Related Material
ASTM A959 317LN ASTM A959:2011 Related Material
ASTM A959 2507 ASTM A959:2011 Related Material
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn P S Si Cr Ni Mo N
<=0.030 <=1.00 <=0.040 <=0.030 <=1.00 25.0-28.0 1.0-3.5 3.0-4.0 <=0.040
Mechanical Properties
Tensile Strength >=585 MPa
Yield Strength >=450 MPa
Elongation >=18%
Hardness <=241 HB
Condition Plate, sheet and strip; yield by 0.2 percent offset

More data from ASTM A240/A240M:2025

From the standard
Mechanical properties 1 condition(s)
Product or thicknessTensile strength, min (MPa)Yield strength, min (MPa)Elongation in 50 mm, min (%)
All58545018
Minimum values; yield strength by the 0.2 percent offset method.
Source: ASTM A240/A240M:2025, Table 2
Hardness 1 condition(s)
Product or thicknessBrinell HBW, maxRockwell, max
All241100 HRBW
Maximum values; either Brinell or Rockwell scale may be used.
Source: ASTM A240/A240M:2025, Table 2
Cold bend 1 value
Cold bend angle
180 deg
Bend tests are not required for chromium steels thicker than 1 in. [25 mm] or for any austenitic or duplex steel regardless of thickness.
Source: ASTM A240/A240M:2025, Table 2

Active ASTM A240/A240M:2025 S44660 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A240/A240M:2025 S44660 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A240/A240M:2025 S44660

+ Post an RFQ for this grade

No open buyer requirements for ASTM A240/A240M:2025 S44660 at this time.

Register for Alerts