Post Stock Login Register

ASTM A240/A240M S44725 vs ASTM A959 26-3-3

Related Material — 65.3% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S44725 (ASTM A240/A240M:2025) and ASTM A959 26-3-3 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S44725 is typically used for pressure vessels and general applications (plate, sheet and strip), while ASTM A959 26-3-3 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A240/A240M S44725 is defined under ASTM International, originating from United States, while ASTM A959 26-3-3 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A240/A240M S44725 vs ASTM A959 26-3-3 is a 65.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65.3%.

Frequently Compared With ASTM A240/A240M S44725:
ASTM A959 29-4 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
65.3%
MECHANICAL MATCH
No shared data
OVERALL
65.3%
Specifications
Property ASTM A240/A240M S44725 ASTM A959 26-3-3
Standard ASTM A240/A240M:2025 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.015 <=0.030
Mn (%) <=0.40 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.020 <=0.030
Si (%) <=0.040 <=1.00
Cr (%) 25.0-28.5 25.0-28.0
Ni (%) <=0.30 1.0-3.5
Mo (%) 1.5-2.5 3.0-4.0
N (%) <=0.018 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S44725 ASTM A959 26-3-3
Tensile Strength >=450 MPa Not specified
Yield Strength >=275 MPa Not specified
Elongation >=20% Not specified
Hardness <=210 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S44725
Pressure vessels and general applications (plate, sheet and strip)
ASTM A959 26-3-3
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can ASTM A240/A240M S44725 Be Substituted With ASTM A959 26-3-3?
ASTM A240/A240M S44725 and ASTM A959 26-3-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S44725
0 active listings and RFQs →
ASTM A959 26-3-3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S44725 and ASTM A959 26-3-3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M S44725 be substituted with ASTM A959 26-3-3?
ASTM A240/A240M S44725 and ASTM A959 26-3-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.