Post Stock Login Register

ASTM A240/A240M S82031 vs EN 10088-1 X1NiCrMoCuN25-20-7

Related Material — 69.2% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S82031 (ASTM A240/A240M:2025) and EN 10088-1 X1NiCrMoCuN25-20-7 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S82031 is defined under ASTM International, originating from United States, while EN 10088-1 X1NiCrMoCuN25-20-7 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S82031 vs EN 10088-1 X1NiCrMoCuN25-20-7 is a 69.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.2%.

Frequently Compared With ASTM A240/A240M S82031:
GOST 5632 08X18H10 GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr13H ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
69.2%
MECHANICAL MATCH
No shared data
OVERALL
69.2%
Specifications
Property ASTM A240/A240M S82031 EN 10088-1 X1NiCrMoCuN25-20-7
Standard ASTM A240/A240M:2025 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.05 <=0.020
Mn (%) <=2.50 <=2.00
P (%) <=0.040 <=0.030
S (%) <=0.005 <=0.010
Si (%) <=0.80 <=0.75
Cr (%) 19.0-22.0 19.0-21.0
Ni (%) 2.0-4.0 24.0-26.0
Mo (%) 0.60-1.40 6.0-7.0
N (%) 0.14-0.24 0.15-0.25
Cu (%) <=1.00 0.50-1.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S82031 EN 10088-1 X1NiCrMoCuN25-20-7
Tensile Strength >=700 MPa Not specified
Yield Strength >=500 MPa Not specified
Elongation >=35% Not specified
Hardness <=31 HRC Not specified
Condition t <= 0.187 in. [5.00 mm] (first condition printed); yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S82031
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X1NiCrMoCuN25-20-7
Not documented
Can ASTM A240/A240M S82031 Be Substituted With EN 10088-1 X1NiCrMoCuN25-20-7?
ASTM A240/A240M S82031 and EN 10088-1 X1NiCrMoCuN25-20-7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S82031
0 active listings and RFQs →
EN 10088-1 X1NiCrMoCuN25-20-7
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S82031 and EN 10088-1 X1NiCrMoCuN25-20-7?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M S82031 be substituted with EN 10088-1 X1NiCrMoCuN25-20-7?
ASTM A240/A240M S82031 and EN 10088-1 X1NiCrMoCuN25-20-7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.