Strong Match — 86.8% match
based on chemical composition and mechanical property overlap.
ASTM A276/A276M N08904 (ASTM A276/A276M:2017) and JIS G4304 SUS890L (JIS G4304:2021) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A276/A276M N08904 is typically used for stainless steel bars and shapes (hot-finished or cold-finished), while JIS G4304 SUS890L is commonly used for hot-rolled stainless steel plates and strips.
ASTM A276/A276M N08904 is defined under ASTM International, originating from United States, while JIS G4304 SUS890L is defined under Japanese Industrial Standards (JIS), originating from Japan.
As per chemical composition, ASTM A276/A276M N08904 vs JIS G4304 SUS890L is a 96.8% match.
As per mechanical properties, the match is 66.7%.
Combined, this makes them a strong match overall at 86.8%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
ASTM A276/A276M N08904
JIS G4304 SUS890L
Tensile Strength
>=490 MPa
>=490 MPa
Yield Strength
>=220 MPa
>=215 MPa
Elongation
>=35%
>=35%
Condition
Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed)
Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser
Hardness
Not specified
<=187 HB
Typical Applications
ASTM A276/A276M N08904
Stainless steel bars and shapes (hot-finished or cold-finished)
JIS G4304 SUS890L
Hot-rolled stainless steel plates and strips
Key Differences
ASTM A276/A276M N08904 specifies N which is not specified for JIS G4304 SUS890L.
Can ASTM A276/A276M N08904 Be Substituted With JIS G4304 SUS890L?
ASTM A276/A276M N08904 and JIS G4304 SUS890L overlap closely enough on chemistry and mechanical properties that JIS G4304 SUS890L is often considered as a substitute for ASTM A276/A276M N08904 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between ASTM A276/A276M N08904 and JIS G4304 SUS890L?
ASTM A276/A276M N08904 specifies N which is not specified for JIS G4304 SUS890L.
Can ASTM A276/A276M N08904 be substituted with JIS G4304 SUS890L?
ASTM A276/A276M N08904 and JIS G4304 SUS890L overlap closely enough on chemistry and mechanical properties that JIS G4304 SUS890L is often considered as a substitute for ASTM A276/A276M N08904 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.