Post Stock Login Register

ASTM A276/A276M S20500 vs EN 10088-1 X13CrMnNiN18-13-2

Close Alternative — 73.9% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S20500 (ASTM A276/A276M:2017) and EN 10088-1 X13CrMnNiN18-13-2 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S20500 is defined under ASTM International, originating from United States, while EN 10088-1 X13CrMnNiN18-13-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A276/A276M S20500 vs EN 10088-1 X13CrMnNiN18-13-2 is a 73.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 73.9%.

Frequently Compared With ASTM A276/A276M S20500:
GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 205 ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
73.9%
MECHANICAL MATCH
No shared data
OVERALL
73.9%
Specifications
Property ASTM A276/A276M S20500 EN 10088-1 X13CrMnNiN18-13-2
Standard ASTM A276/A276M:2017 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.12-0.25 <=0.15
Mn (%) 14.0-15.5 11.0-14.0
P (%) <=0.060 <=0.045
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Cr (%) 16.5-18.0 16.5-19.0
Ni (%) 1.0-1.7 0.5-2.5
N (%) 0.32-0.40 0.20-0.45
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S20500 EN 10088-1 X13CrMnNiN18-13-2
Tensile Strength >=690 MPa Not specified
Yield Strength >=414 MPa Not specified
Elongation >=40% Not specified
Condition Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed) Not specified
Typical Applications
ASTM A276/A276M S20500
Stainless steel bars and shapes (hot-finished or cold-finished)
EN 10088-1 X13CrMnNiN18-13-2
Not documented
Can ASTM A276/A276M S20500 Be Substituted With EN 10088-1 X13CrMnNiN18-13-2?
ASTM A276/A276M S20500 and EN 10088-1 X13CrMnNiN18-13-2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A276/A276M S20500
0 active listings and RFQs →
EN 10088-1 X13CrMnNiN18-13-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S20500 and EN 10088-1 X13CrMnNiN18-13-2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A276/A276M S20500 be substituted with EN 10088-1 X13CrMnNiN18-13-2?
ASTM A276/A276M S20500 and EN 10088-1 X13CrMnNiN18-13-2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.