Post Stock Login Register

ASTM A276/A276M S21900 vs ASTM A959 XM-10

Strong Match — 100% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S21900 (ASTM A276/A276M:2017) and ASTM A959 XM-10 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S21900 is typically used for stainless steel bars and shapes (hot-finished or cold-finished), while ASTM A959 XM-10 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A276/A276M S21900 is defined under ASTM International, originating from United States, while ASTM A959 XM-10 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A276/A276M S21900 vs ASTM A959 XM-10 is a 100% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 100%.

Frequently Compared With ASTM A276/A276M S21900:
ASTM A959 202 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
No shared data
OVERALL
100%
Specifications
Property ASTM A276/A276M S21900 ASTM A959 XM-10
Standard ASTM A276/A276M:2017 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.08
Mn (%) 8.0-10.0 8.0-10.0
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Cr (%) 19.0-21.5 19.0-21.5
Ni (%) 5.5-7.5 5.5-7.5
N (%) 0.15-0.40 0.15-0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S21900 ASTM A959 XM-10
Tensile Strength >=620 MPa Not specified
Yield Strength >=345 MPa Not specified
Elongation >=45% Not specified
Condition Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed) Not specified
Typical Applications
ASTM A276/A276M S21900
Stainless steel bars and shapes (hot-finished or cold-finished)
ASTM A959 XM-10
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can ASTM A276/A276M S21900 Be Substituted With ASTM A959 XM-10?
ASTM A276/A276M S21900 and ASTM A959 XM-10 overlap closely enough on chemistry and mechanical properties that ASTM A959 XM-10 is often considered as a substitute for ASTM A276/A276M S21900 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A276/A276M S21900
0 active listings and RFQs →
ASTM A959 XM-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S21900 and ASTM A959 XM-10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A276/A276M S21900 be substituted with ASTM A959 XM-10?
ASTM A276/A276M S21900 and ASTM A959 XM-10 overlap closely enough on chemistry and mechanical properties that ASTM A959 XM-10 is often considered as a substitute for ASTM A276/A276M S21900 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.