Post Stock Login Register

ASTM A276/A276M S30500 vs EN 10088-1 X4CrNi18-12

Strong Match — 91.7% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S30500 (ASTM A276/A276M:2017) and EN 10088-1 X4CrNi18-12 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S30500 is defined under ASTM International, originating from United States, while EN 10088-1 X4CrNi18-12 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A276/A276M S30500 vs EN 10088-1 X4CrNi18-12 is a 91.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 91.7%.

Frequently Compared With ASTM A276/A276M S30500:
ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
91.7%
MECHANICAL MATCH
No shared data
OVERALL
91.7%
Specifications
Property ASTM A276/A276M S30500 EN 10088-1 X4CrNi18-12
Standard ASTM A276/A276M:2017 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.12 <=0.06
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.015
Si (%) <=1.00 <=1.00
Cr (%) 17.0-19.0 17.0-19.0
Ni (%) 11.0-13.0 11.0-13.0
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S30500 EN 10088-1 X4CrNi18-12
Tensile Strength >=515 MPa Not specified
Yield Strength >=205 MPa Not specified
Elongation >=40% Not specified
Condition Condition A (Annealed), hot-finished, all sizes (first row printed) Not specified
Typical Applications
ASTM A276/A276M S30500
Stainless steel bars and shapes (hot-finished or cold-finished)
EN 10088-1 X4CrNi18-12
Not documented
Key Differences
Can ASTM A276/A276M S30500 Be Substituted With EN 10088-1 X4CrNi18-12?
ASTM A276/A276M S30500 and EN 10088-1 X4CrNi18-12 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X4CrNi18-12 is often considered as a substitute for ASTM A276/A276M S30500 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A276/A276M S30500
0 active listings and RFQs →
EN 10088-1 X4CrNi18-12
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S30500 and EN 10088-1 X4CrNi18-12?
EN 10088-1 X4CrNi18-12 specifies N which is not specified for ASTM A276/A276M S30500.
Can ASTM A276/A276M S30500 be substituted with EN 10088-1 X4CrNi18-12?
ASTM A276/A276M S30500 and EN 10088-1 X4CrNi18-12 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X4CrNi18-12 is often considered as a substitute for ASTM A276/A276M S30500 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.