Post Stock Login Register

ASTM A276/A276M S34565 vs EN 10088-1 X2CrNiMnMoN25-18-6-5

Strong Match — 87% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S34565 (ASTM A276/A276M:2017) and EN 10088-1 X2CrNiMnMoN25-18-6-5 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S34565 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMnMoN25-18-6-5 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A276/A276M S34565 vs EN 10088-1 X2CrNiMnMoN25-18-6-5 is a 87% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87%.

Frequently Compared With ASTM A276/A276M S34565:
EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
87%
MECHANICAL MATCH
No shared data
OVERALL
87%
Specifications
Property ASTM A276/A276M S34565 EN 10088-1 X2CrNiMnMoN25-18-6-5
Standard ASTM A276/A276M:2017 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) 5.0-7.0 5.0-7.0
P (%) <=0.030 <=0.030
S (%) <=0.010 <=0.015
Si (%) <=1.00 <=1.00
Cr (%) 23.0-25.0 24.0-26.0
Ni (%) 16.0-18.0 16.0-19.0
Mo (%) 4.0-5.0 4.0-5.0
N (%) 0.40-0.60 0.30-0.60
Nb (%) <=0.10 <=0.15
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S34565 EN 10088-1 X2CrNiMnMoN25-18-6-5
Tensile Strength >=795 MPa Not specified
Yield Strength >=415 MPa Not specified
Elongation >=35% Not specified
Typical Applications
ASTM A276/A276M S34565
Stainless steel bars and shapes (hot-finished or cold-finished)
EN 10088-1 X2CrNiMnMoN25-18-6-5
Not documented
Can ASTM A276/A276M S34565 Be Substituted With EN 10088-1 X2CrNiMnMoN25-18-6-5?
ASTM A276/A276M S34565 and EN 10088-1 X2CrNiMnMoN25-18-6-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMnMoN25-18-6-5 is often considered as a substitute for ASTM A276/A276M S34565 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A276/A276M S34565
0 active listings and RFQs →
EN 10088-1 X2CrNiMnMoN25-18-6-5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S34565 and EN 10088-1 X2CrNiMnMoN25-18-6-5?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A276/A276M S34565 be substituted with EN 10088-1 X2CrNiMnMoN25-18-6-5?
ASTM A276/A276M S34565 and EN 10088-1 X2CrNiMnMoN25-18-6-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMnMoN25-18-6-5 is often considered as a substitute for ASTM A276/A276M S34565 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.