Post Stock Login Register

ASTM A276/A276M S34700 vs ASTM A276/A276M S34800

Strong Match — 97.2% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S34700 (ASTM A276/A276M:2017) and ASTM A276/A276M S34800 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S34700 is typically used for stainless steel bars and shapes (hot-finished or cold-finished), while ASTM A276/A276M S34800 is commonly used for stainless steel bars and shapes (hot-finished or cold-finished). ASTM A276/A276M S34700 is defined under ASTM International, originating from United States, while ASTM A276/A276M S34800 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A276/A276M S34700 vs ASTM A276/A276M S34800 is a 95.8% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 97.2%.

Frequently Compared With ASTM A276/A276M S34700:
GOST 5632 08X18H10 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
95.8%
MECHANICAL MATCH
100%
OVERALL
97.2%
Specifications
Property ASTM A276/A276M S34700 ASTM A276/A276M S34800
Standard ASTM A276/A276M:2017 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.08
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Cr (%) 17.0-19.0 17.0-19.0
Ni (%) 9.0-12.0 9.0-12.0
Nb (%) <=1.10 <=1.10
Ta (%) Not specified <=0.10
Co (%) Not specified <=0.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S34700 ASTM A276/A276M S34800
Tensile Strength >=515 MPa >=515 MPa
Yield Strength >=205 MPa >=205 MPa
Elongation >=40% >=40%
Condition Condition A (Annealed), hot-finished, all sizes (first row printed) Condition A (Annealed), hot-finished, all sizes (first row printed)
Typical Applications
ASTM A276/A276M S34700
Stainless steel bars and shapes (hot-finished or cold-finished)
ASTM A276/A276M S34800
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can ASTM A276/A276M S34700 Be Substituted With ASTM A276/A276M S34800?
ASTM A276/A276M S34700 and ASTM A276/A276M S34800 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S34800 is often considered as a substitute for ASTM A276/A276M S34700 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A276/A276M S34700
0 active listings and RFQs →
ASTM A276/A276M S34800
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S34700 and ASTM A276/A276M S34800?
ASTM A276/A276M S34800 specifies Ta, Co which are not specified for ASTM A276/A276M S34700.
Can ASTM A276/A276M S34700 be substituted with ASTM A276/A276M S34800?
ASTM A276/A276M S34700 and ASTM A276/A276M S34800 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S34800 is often considered as a substitute for ASTM A276/A276M S34700 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.